Category
Most Popular Products
Product was successfully added to quote request.View List
AP 33 ANALOG MULTITESTER – SANWA
$0.00
Pocketable Analog Multimeter / Analog Multitester
- Employs test leads woven with nylon. Reduces the possibility of wire damage due to winding and pulling
- The test leads can be winded up and stored
- Battery check function has 2 ranges of 1.5V/9V
- Shock absorbing rubber that is robust against falling
AP33 Analog Multitesters / Analog Multimeter – Slim compact AMT
Small pocket size
BASIC FEATURES:
- Employs test leads woven with nylon. Reduces the possibility of wire damage due to winding and pulling
- The test leads can be winded up and stored
- Battery check function has 2 ranges of 1.5V/9V
- Shock absorbing rubber that is robust against falling
SAFETY:
IEC61010 CAT.III 300V CAT.II 500V
SPECIFICATIONS:
Function | Measuring range | Tolerance |
---|---|---|
DCV | 10/50/250/500V(2kΩ/V) | ±5% of full scale |
ACV | 50/250/500V(2kΩ/V) | ±5% of full scale |
Battery check | 1.5V/9V | ̶ |
DCA | 25m/250mA | ±5% of full scale |
Resistance | 10k/1MΩ | ±3% of arc |
Frequency characteristic | AC50V range or lower 40Hz to 10kHz: frequency response within ±3% |
Battery | R03(AAA battery)×1 |
Built-in fuse | F0301 Φ5x20mm 0.5A/250V 300A Glass fuse |
Size/Mass | H126×W87×D30mm/Approx. 185g |
Test lead length/Pin tip | Approx. 0.6m/13mm |
※The value in ( )at DCV and ACV is input resistance
Category: Analog Multitesters
Related products
-
YX – 361TR ANALOG MULTITESTER – SANWA
$0.00Add To QuoteVariety of measurement functions by using 24-contact switch
- Employing 24-contact switch and plus alpha function enable you to enjoy a total of 33 functions
- Zero center meter for ± DCV measurement
- With LED for continuity check
- With OUTPUT measurement terminal (series capacitor inserted)
- Battery check
- DC current gain (hFE) of transistor can be measured by using separately available hFE connector
-
SP21 ANALOG MULTITESTER – SANWA
$0.00Add To QuoteShockproof meter
With continuity check beeper
- Employs shockproof taut-band meter that is not easily damaged even if dropped
- Zero center meter for ± DCV measurement
- Double protection with fuse and diode to protect the internal circuit from overvoltage
- Battery check
- With a tilt stand that helps to read the meter
-
CX 506a ANALOG MULTITESTER – SANWA
$0.00Add To QuoteCapacitance measurement function with built-in transistor oscillator
- Variety of measurement functions by using 26-contact switch
- Capacitance measurement from 50pF to 2000μF
- High input resistance 50kΩ/V (each range of DC3 to 300V)
- DC polarity switchable
-
YX – 360TRF ANALOG MULTITESTER – SANWA
$0.00Add To QuoteCase and instrument in one body, that brings you a convenience to carry and store
- Drop shock proof meter
- Null(zero center) meter ±5 / ±25 in DCV
- High resistance up to 200MΩ with low voltage
- Protective body cover
- Capacitance, dB, Li measurement
-
TA 55 ANALOG MULTITESTER – SANWA
$0.00Add To QuoteAutomobile measurement support
30A range supporting automobile measurement
- Improved visibility with color matching of scale and range selector switch
- Continuity check function with beeper sound
- Stand to make easy to read the scale
- Measurable up to DCA30A(300A using an optional clamp)
- Battery check(12V battery only)
Contact Us
For Quotes:
email: info@bhumika.ca
phone: 613-619-0894