Category
CD800a DIGITAL MULTIMETER – SANWA
ALL-IN-ONE DMM
Tough body cover
- 4000 counts
- Best accuracy 0.7%
- Auto power off(30min.)(cancelable)
- Low power ohm(input voltage 0.4V)at continuity range
- Solid & portective body cover that can also be used as a tilt stand
- Chip resister holder behind the body cover
CD 800a
Digital Multimeters - All in one DMM
Tough body cover
BASIC FEATURES:
- 3-3 / 4 digits 4000 count
- 0.7% best accuracy
- Capacitance measurement
* Not suitable for measurement of condensers with large leak current. - Frequency measurement (AC sine wave only)
- Data hold / Range hold
- Relative value
- Auto power off (30min.) (cancelable)
- Low power ohm (input voltage 0.4V) at continuity range
- Solid & protective body cover that can also be used as a tilt stand
- Chip holder behind the body cover
- Display : numeral display 4000
- Sampling rate : 2 times / sec.
- AC frequency bandwidth : 40〜400Hz
SAFETY:
IEC61010-1 CAT.III 600V Max.
OPTIONAL ACCESSORIES:
Clip adapter : CL-11, CL-15a, CL-DG3a, TL-8IC
SPECIFICATIONS:
CD800a | Measuring range | Best accuracy | Resolution | Input impedance |
---|---|---|---|---|
DCV | 400m/4/40/400/600V | ±(0.7%+3) | 0.1mV | 10M~100MΩ |
ACV | 4/40/400/600V | ±(1.6%+5) | 0.001V | 10M~11MΩ |
DCA | 40m/400mA | ±(2.2%+5) | 0.01mA | |
ACA | 40m/400mA | ±(2.8%+5) | 0.01mA | |
Resistance | 400/4k/40k/400k/4M/40MΩ | ±(1.2%+5) | 0.1Ω | |
Capacitance | 50n/500n/5μ/50μ/100μF | ±(5%+10) | 0.01nF | |
Frequency | 5Hz~100kHz | ±(0.5%+3) | ||
Duty cycle | 20%~80% | ±(0.5%+5) | ||
Continuity | Buzzer sounds at between 10Ω and 120Ω Open voltage:Approx.0.4V | |||
Diode test | Open voltage:approx.1.5V |
Display | numeral display 4000 |
Sampling rate | 3 times/sec. |
Bandwidth | 40Hz~400Hz |
Fuse | 0.5A/250V 1.5kA Φ5×20 Ceramic |
Battery | R6P(1.5V)x2 |
Battery life | Approx.500h (manganese battery) at DCV range |
Size/Mass | H176×W104×D46mm/Approx.340g |
Test lead length/Pin tip | Length: approx. 0.7m/19mm |
Category: Digital Multimeters
Related products
-
PC700 DIGITAL MULTIMETER – SANWA
Add To QuoteHigh accuracy (PC Link)
Dual display, Best accuracy 0.06%
- 6000&9999 counts
- DC/AC voltage measurement resolution 0.01mV
- Dual display shows voltage/current and its frequency, and AD components and DC components of voltage/current
- High speed bar graph
- Auto power save (30min.)(cancelable)
-
PC773 DIGITAL MULTIMETER – SANWA
Add To QuoteData processing (PC connectable)
11000 counts, Minimum resolusion 0.01mV,0.01Ω
- 11000 counts
- Best accuracy 0.28%
- Double molding of elastic elastomer materials
- AC/DC current measurable max.11A
- Continuity buzzer and LED lamp
- Auto power save(30min.)(cancelable)
-
PC LINK 7 SOFTWARE – SANWA
Add To QuoteFor easier operation, higher visibility, and… Furbished GUI.
Enhanced new features such as separated graphs, user restrictions, and etc.
Max 8 channels to the PC connection at the same time.- Automatically detects a port connected with a digital multimeter.
- No additional driver installation required with Windows standard USB drivers.
- The retrieval interval can be set by seconds. The shortest reading interval of 0.2 – 0.3 seconds depending on the digital multimeter measuring function.
- Allows setting for vertical/horizontal zoom, reading at the cursor position, and Y axis split while retrieving data.
- Allows automatic retrieval by schedule setting.
- Allows data saving into CSV files and sending e-mails of alert information with alarm setting.
- Allows data saving into CSV files with the date and time appended.
- Multi-window, separated graphs by each channel
- Allows automatic e-mail of measurement data.
- Allows limited operations depending on the user with usage restriction function.
- Allows conditional recording by event function.
-
PM33a DIGITAL MULTIMETER DIGITAL CLAMP METER – SANWA
Add To QuoteHybrid Digital Multimeters
Hybrid pocket size DMM + clamp meter
- Lightweight approx.160g
- MAX/MIN value hold
- U-shaped clamp sensor, 7mm thick
- DC/AC current measurable up to 100A
- Auto power off(30min.)
-
KP1 DIGITAL MULTIMETER – SANWA
Add To QuoteVolt Tester
CAT.IV Volt tester
- Self test-checking failures of LCD, disconnection of a lead wire
- EF(Electric Field)detection
- LCD with backlight & LED Light for dark place
- Auto data hold
- Auto power off(1min.)
- Auto identification of AC or DC voltage