Category
CP – 7D ANALOG MULTITESTER – SANWA
Wide scale with mirror for easy reading of measured values
- Wide scale with mirror
- Fixed test leads for safety and operability
- Employs metal oxide film resistors that are high precision, heat resistant, smokeless
- Battery check
- Internal circuit protection with fuse and diode
Analog Multitesters – Slim compact AMT

BASIC FEATURES:
- Wide scale panel with mirror
- Affixed test leads providing better safety
- High-precision, non-flammable, smokeless metal-oxide film resistor
- Battery check
- Fuse and diode circuit protection
- Bandwidth : 30〜100kHz (AC10V), 30〜20kHz (AC50V)
OPTIONAL ACCESSORIES:
Carrying case : C-CP
Clip adapter : CL-11, CL-15a, CL-DG3a, TL-8IC
SPECIFICATIONS:
Function | Measuring range | Tolerance |
---|---|---|
DCV | 0.25/2.5/10/50/250/500V(4kΩ/V) | ±3% of full scale |
ACV | 10/50/250/500V(4kΩ/V) | ±4% of full scale |
DCA | 0.25m/25m/500mA | ±3% of full scale |
Resistance | 2k/20k/1MΩ | ±3% of arc |
Load current | 0~74mA/7.4mA/150μA | ̶ |
Battery check | 0.9~1.5V | ̶ |
Low-frequency output | -20~36dB | ̶ |
Frequency characteristic | AC10V range 30Hz to 100kHz, AC50V range 30Hz to 20kHz: frequency response within ±3% |
Battery | R6P(AA battery)×1 |
Built-in fuse | F0301 Φ5x20mm 0.5A/250V 300A Glass fuse |
Size/Mass | H119×W82×D23mm/Approx. 140g |
※The value in ( )at DCV and ACV is input resistance
Related products
-
SP21 ANALOG MULTITESTER – SANWA
Add To QuoteShockproof meter
With continuity check beeper
- Employs shockproof taut-band meter that is not easily damaged even if dropped
- Zero center meter for ± DCV measurement
- Double protection with fuse and diode to protect the internal circuit from overvoltage
- Battery check
- With a tilt stand that helps to read the meter
-
AU-32 / AU-31 ANALOG MULTITESTER – SANWA
Add To QuoteAU-32 / AU-31 Analog Multitesters High input impedance Auto range, High input impedance BASIC FEATURES: Auto range selection (V, Ω) Auto polarity High input impedance 1〜10MΩ Series capacitor input ※AU-31 ACV only Auto 0Ω adjustment Inner battery check DC / AC auto selection ※AU-32 only 5 ranges DC / AC current ※AU-32 only Bandwidth : …
-
EM7000 ANALOG MULTITESTER – SANWA
Add To QuoteHigh sensitivity for measurement of lower capacitance
- High-sensitivity FET electronic tester with high input resistance (2.5M – 12MΩ for DCV) and 0.12μA range (DC current)
- Frequency response against 40Hz to 1MHz of sine wave (AC low voltage)
- Measurement of P-P value (Peak to Peak value) of square wave pulse (duty cycle 20% or higher)
- Wide range resistance measurement from 0.2Ω to 200MΩ
※Zero adjustment needs to be performed before measurement, since the instrument is an electronic tester.
-
YX – 360TRF ANALOG MULTITESTER – SANWA
Add To QuoteCase and instrument in one body, that brings you a convenience to carry and store
- Drop shock proof meter
- Null(zero center) meter ±5 / ±25 in DCV
- High resistance up to 200MΩ with low voltage
- Protective body cover
- Capacitance, dB, Li measurement
-
VS – 100 ANALOG MULTITESTER – SANWA
Add To QuoteEmploys current-limiting fuse with 100kA of breaking current
- Tester for maintenance and management for electrical equipment that is suitable for measuring high-power low-voltage circuits(500V or lower)
- Built-in current-limiting fuse cuts off the current at 100kA to reduces the risk of arc discharge
- Hard case included