Category
DCM-400AD CLAMP METER – SANWA
Suitable for automotive maintenance & DMM functions
- 4000 counts, 42 segments analog bar graph
- Auto power off (30 min.)
- Low battery power indication
DCM-400AD
Clamp Meters AC
Suitable for automotive maintenance & DMM functions
Calibration available products
- 4000 counts, 42 segments analog bar graph
- Auto power off (30 min.)
- Low battery power indication
Low cost & DMM functions
SAFETY:
IEC61010-1 (EN61010-1) 2001-02 CAT.III300V. / CAT.II 600V
OPTIONAL ACCESSORIES:
Clip adapter : CL-11, CL-13, CL-15a, CL-DG3a, TL-8IC
Test lead : TL-21M, TLF-120
SPECIFICATIONS:
Function | Measuring range | Best accuracy | Resolution |
---|---|---|---|
ACA | 40/400A | ±(2%±10) | 0.01A |
DCA | 40/400A | ±(2.5%±10) | 0.01A |
ACV | 400/600V | ±(1.5%±5) | 0.1V |
DCV | 400/600V | ±(1%±2) | 0.1V |
Resistance | 400Ω | ±(1%±2) | 0.1Ω |
Continuity | Buzzer sounds at less than approx. 40Ω Open voltage: approx. 1.5V |
Sampling rate | 2 times/sec., 20 times/sec. for bar graph |
Bandwidth | 50~500Hz |
Display | 4000 |
Clamp diameter/Conductor size | Φ25mm/10×34mm |
Battery | LR03×2 |
Battery life | Approx. 50 hrs.(Alkaline battery) |
Size/Mass | H193×W50×D28mm/Approx. 230g |
Safety standards | IEC61010 CAT.Ⅲ300V CAT.Ⅱ600V |
Category: Clamp Meters
Related products
-
DCM2000DR
Add To QuoteDC/AC current measurable max. 2000A, CAT.IV 1000V
- Dual display shows voltage/current and its frequency
- EF (Electric Field) detection
- VFD (Variable Frequency Drive) frequency measurement
- Low input impedance voltage measurement capable of attenuating the effects of ghost voltages
- Peak hold (Interval: 5 ms)
- Auto power save (30 min./Cancelable)
-
DCM-60L CLAMP METER – SANWA
Add To QuoteLow cost & DMM functionsNOTE: This item has been discontinued by SANWA. We have a few units that’s available in stock, and are available at great prices.BASIC FEATURES:
- Measurable AC 0.1A〜600A
- ACV & Resistance measurement
- Small design & easy to carry
- Data hold
- Continuity check buzzer
- Sampling rate : 2 times / sec.
- AC frequency bandwidth : 50〜500Hz
-
DG35a DIGITAL MULTIMETER CLAMP METER – SANWA
Add To QuoteDG35a MΩ Tester Hybrid pocket size MΩ tester + clamp meter 500V; 40MΩ 250V; 40MΩ 125V; 40MΩ Lightweight approx.160g DCV/ACV measurement functions DCV/AC current measurable up to 100A Test leads holder U-shaped clamp sensor, 7mm thick Specifications DG35a Measuring rage Best accuracy Resolution MΩTest 40MΩ ±(3.0%+3) 0.01MΩ Test voltage 125/250/500V DCA 100A ±(2.0%+5) 0.1A ACA …