Category
DCM-600DR CLAMP METER – SANWA
Suitable for maintenance of vehicle, hybrid vehicle, EV & DMM functions
- AC/DC current measurable max. 600A
- Peak hold (Interval: 1ms)
- Auto power save (30min./Cancelable)
Clamp Meters DC/AC+True RMS
Suitable for maintenance of vehicle, hybrid vehicle, electric vehicle & DMM functions
BASIC FEATURES:
- AC / DC current measurable max. 600A
- True RMS
- Peak hold
※When the peak button is pressed, the measuring   range will be fixed to the 600A range. - Relative value measurement
- Data hold, Auto power save
- LCD with back light
- Sampling rate : 3 times / sec. for numeral disply,
SAFETY:
IEC61010-1 CAT.III600V, IEC61010-2-032, IEC61010-031
OPTIONAL ACCESSORIES:
Clip adapter : CL-11, CL-13, CL-15a, CL-DG3a, TL-8IC
Test lead : TL-21M, TLF-120
SPECIFICATIONS:
Function | Measuring range | Best accuracy | Resolution | Input impedance |
DCA | 60/600A | ±(2%+5) | 0.01A | |
ACA | 60/600A | ±(2%+5) | 0.01A | |
DCV | 600V | ±(1%+2) | 0.1V | 1MΩ |
ACV | 600V | ±(1.2%+5) | 0.1V | |
Resistance | 999.9Ω | ±(1%+7) | 0.1Ω | |
Continuity | Buzzer sounds at less than 40Ω Open voltage: approx. 2.9V |
Sampling rate | 3 times/sec. |
Bandwidth | 50-500Hz |
Display | 6000 |
Clamp diameter/Conductor size | Φ30mm/10×50mm |
Battery | LR03×2 |
Battery life | Approx. 40 hrs. (Backlight off) |
Size/Mass | H208×W69×D38mm/Approx. 260g |
Safety standards | IEC61010 CAT.Ⅲ600V |
In the peak hold mode, the measuring range is fixed at 600A.
Category: Clamp Meters
Related products
-
DCL11R Clamp Meter – SANWA
Add To QuoteRMS mini clamp meter with backlight
- Compact pocket size
- Auto power off (15 min./Cancelable)
-
DCL31DR – Digital Clamp Meter – SANWA
Add To QuoteDC/AC RMS mini clamp meter with peak hold function
- Compact pocket size
- Auto power off (15min./Cancelable)
-
DG34a DIGITAL MULTIMETER CLAMP METER – SANWA
Add To QuoteMΩ Tester
Hybrid pocket size MΩ tester + clamp meter
- 500V; 400MΩ
- 250V; 400MΩ
- 125V; 400MΩ
- Lightweight approx. 160g
- DCV/ACV measurement functions
- DC/AC current measurable up to 100A
- Test leads holder
- U-shaped clamp sensor, 7mm thick
-
DCM60R Clamp Meter – SANWA
Add To QuoteLow cost & DMM functions
- ACV & resistance measurement
- Small design & easy to carry
-
DCM2000DR
Add To QuoteDC/AC current measurable max. 2000A, CAT.IV 1000V
- Dual display shows voltage/current and its frequency
- EF (Electric Field) detection
- VFD (Variable Frequency Drive) frequency measurement
- Low input impedance voltage measurement capable of attenuating the effects of ghost voltages
- Peak hold (Interval: 5 ms)
- Auto power save (30 min./Cancelable)
Contact Us
For Quotes:
email: info@bhumika.ca
phone: 613-619-0894