Category
Most Popular Products
DM 509S INSULATION TESTER – SANWA
$0.00
Analog single range
500V/1000MΩ single range, Lightweight design
- One-shot or continuous measurement push switch
- DCV measurement range (DC60V)
- Auto discharge function
- Inner battery check range
- Shoulder Strap
500V/1000MΩ single range, Lightweight design
BASIC FEATURES:
- One-shot or continuous measurement push switch
- DCV measurement range (DC60V)
- Auto discharge function
- Inner battery check range
- Shoulder Strap
OPTIONAL ACCESSORIES:
Test lead : TLF-120
SPECIFICATIONS:
Scale(MΩ) | 0.5~1~500~1000MΩ | |
Tolerance | ± 5% of reading(1st effective measurement range : written in thick print above) ±10% of reading(2nd effective measurement range : written in small type above) |
|
ACV | 600V | |
Tolerance | Within ±5% of the max. scale value(50~60Hz sine wave) | |
DCV | 60V | |
Tolerance | Within ±5% of the max. scale value | |
Rated current | 1.0~1.2mA | |
Battery | 6LF22/6LR61(9V alkaline battery)x1 | |
Size/Mass | H144×W99×D43mm/Approx. 310g | |
Safety standard | IEC61010 CAT.Ⅲ 600V |
Related products
-
PDM1529S INSULATION TESTER – SANWA
$0.00Add To QuoteAnalog 3 ranges
3 test voltage ranges, Lightweight design
- 1000V; 2000MΩ
- 500V; 100MΩ
- 250V; 100MΩ
- Easy viewing and readable graduations
- One-shot or continuous measurement push switch
- DCV measurement range(DCV60V)
- Auto discharge function
- Inner battery check range
- Shoulder strap
-
PDM 5219S INSULATION TESTER – SANWA
$0.00Add To QuoteAnalog 3 ranges
3 test voltage ranges, Lightweight design
- 500V; 100MΩ
- 250V; 100MΩ
- 125V; 100MΩ
- Easy viewing and readable graduations
- One-shot or continuous measurement push switch
- DCV measurement range(DCV60V)
- Auto discharge function
- Inner battery check range
- Shoulder strap
-
DG 10 INSULATION TESTER – SANWA
$0.00Add To QuoteInsulation Testers Pocket size/Digital Suitable for high voltage insulation measurement at construction sites BASIC FEATURES: Test voltage DC500V / 125V Wide measurement range 1kΩ〜400MΩ High resolution 0.001MΩ(1kΩ) Data hold Auto power save (30min.) Sampling rate : 2 times / sec. for numeral disply, 20 times / sec. for bar graph SPECIFICATIONS:
-
MG1000 INSULATION TESTER – SANWA
$0.00Add To QuoteDigital 3 ranges
Automatic determination of the live state of the measurement line
- 1000V; 4000MΩ
- 500V; 4000MΩ
- 250V; 4000MΩ
- Hot-line state(30V minimum) detection
- Large volt mark with the buzzer sound
- Automatic data hold function
- Bar graph just like analog meter
- Large display with backlight
- Easy to use & tough body
- IP54
- Continuity test(200mA) function
-
MG5000 Insulation Tester – SANWA
$0.00Add To QuoteDigital 5 ranges
High voltage type
- 5000V; 1000GMΩ
- 2500V; 100GMΩ
- 1000V; 2000MMΩ
- 500V; 1000MMΩ
- 250V; 100MMΩ
- Test voltage DC5000V/2500V/1000V/500V/250V
- Insulation Resistance up to 1TΩ
- Short circuit current up to 4mA
- Dielectric Absorption Ratio(DAR)
- Polarisation Index(PI)
- Auto discharge function
- Data hold(Auto)
- Auto power save
Contact Us
For Quotes:
email: info@bhumika.ca
phone: 613-619-0894