DM1009S INSULATION TESTER – SANWA
Analog single range
1000V/2000MΩ single range, Lightweight design
- One-shot or continuous measurement push switch
- DCV measurement range (DC60V)
- Auto discharge function
- Inner battery check range
- Shoulder Strap
Insulation Testers
1000V/2000MΩ single range, Lightweight design
BASIC FEATURES:
- One-shot or continuous measurement push switch
- DCV measurement range (DC60V)
- Auto discharge function
- Inner battery check range
- Shoulder Strap
SPECIFICATIONS:
| Scale(MΩ) | 1～2～1000～2000MΩ | |
| Tolerance | ± 5% of reading（1st effective measurement range : written in thick print above） ±10% of reading（2nd effective measurement range : written in small type above) |
|
| ACV | 600V | |
| Tolerance | Within ±5% of the max. scale value(50～60Hz sine wave) | |
| DCV | 60V | |
| Tolerance | Within ±5% of the max. scale value | |
| Rated current | 1.0～1.2mA | |
| Battery | 6LF22/6LR61(9V alkaline battery)x1 | |
| Size/Mass | H144×W99×D43mm/Approx. 310g | |
| Safety standard | IEC61010 CAT.Ⅲ 600V |
Related products
-
DG 10 INSULATION TESTER – SANWA
Add To QuoteInsulation Testers Pocket size/Digital Suitable for high voltage insulation measurement at construction sites BASIC FEATURES: Test voltage DC500V / 125V Wide measurement range 1kΩ〜400MΩ High resolution 0.001MΩ（1kΩ） Data hold Auto power save (30min.) Sampling rate : 2 times / sec. for numeral disply,　20 times / sec. for bar graph SPECIFICATIONS:
-
PDM509S Insulation Tester – SANWA
Add To QuoteAnalog single range
500V/100MΩ single range, Lightweight design
- 500V; 100MΩ
- One-shot or continuous measurement push switch
- DCV measurement range (DC60V)
- Auto discharge function
- Inner battery check range
- Shoulder Strap
-
PDM 5219S INSULATION TESTER – SANWA
Add To QuoteAnalog 3 ranges
3 test voltage ranges, Lightweight design
- 500V; 100MΩ
- 250V; 100MΩ
- 125V; 100MΩ
- Easy viewing and readable graduations
- One-shot or continuous measurement push switch
- DCV measurement range(DCV60V)
- Auto discharge function
- Inner battery check range
- Shoulder strap
-
DG34a DIGITAL MULTIMETER CLAMP METER – SANWA
Add To QuoteMΩ Tester
Hybrid pocket size MΩ tester + clamp meter
- 500V; 400MΩ
- 250V; 400MΩ
- 125V; 400MΩ
- Lightweight approx. 160g
- DCV/ACV measurement functions
- DC/AC current measurable up to 100A
- Test leads holder
- U-shaped clamp sensor, 7mm thick
-
MG5000 Insulation Tester – SANWA
Add To QuoteDigital 5 ranges
High voltage type
- 5000V; 1000GMΩ
- 2500V; 100GMΩ
- 1000V; 2000MMΩ
- 500V; 1000MMΩ
- 250V; 100MMΩ
- Test voltage DC5000V/2500V/1000V/500V/250V
- Insulation Resistance up to 1TΩ
- Short circuit current up to 4mA
- Dielectric Absorption Ratio(DAR)
- Polarisation Index(PI)
- Auto discharge function
- Data hold(Auto)
- Auto power save
