Category
Most Popular Products
Product was successfully added to quote request.View List
EM7000 ANALOG MULTITESTER – SANWA
$0.00
High sensitivity for measurement of lower capacitance
- High-sensitivity FET electronic tester with high input resistance (2.5M – 12MΩ for DCV) and 0.12μA range (DC current)
- Frequency response against 40Hz to 1MHz of sine wave (AC low voltage)
- Measurement of P-P value (Peak to Peak value) of square wave pulse (duty cycle 20% or higher)
- Wide range resistance measurement from 0.2Ω to 200MΩ
※Zero adjustment needs to be performed before measurement, since the instrument is an electronic tester.
Analog Multitesters FET Tester
High sensitivity for measurement of lower capacitance
BASIC FEATURES:
- High input impedance (DCV2.5〜12MΩ/V), and 0.12μA range (DCA)
- Bandwidth 40Hz〜1MHz AC sign wave
- Rectangular pulse P-P (Peak to Peak) measurement (duty cycle 20% and above)
- Wide ohm range 0.2Ω〜200MΩ
- Bandwidth : 40Hz〜1Mhz (12V range and below)
SAFETY:
IEC61010-1 (EN61010-1) 2001-02 CAT.III 600V Max.
OPTIONAL ACCESSORIES:
HV probe : HV-60
Carrying case : C-CA
Clip adapter : CL-11, CL-13, CL-15a, CL-DG3a, TL-8IC
Test lead : TL-21M, TLF-120
Function | Measuring range | Tolerance |
---|---|---|
DCV | 0.3/1.2/3/12/30/120/300/1000V(2.5~12MΩ) | ±3% of full scale |
±DCV | ±0.15/0.6/1.5/6/15/60/150/600V(2.5~12MΩ) | ±7% of full scale |
AC voltage rms(50/60Hz) | 3V(approx.2.5MΩ)/12V(approx.1.1MΩ) 30V/120/300V(approx.800KΩ)/750V(approx.10MΩ) | ±3% of full scale |
ACV P-P |
Sine wave – 8.4V(approx.2.5MΩ/V)/33V(approx.1.1MΩ) 84/330/840V(approx.800KΩ) | ±5% of full scale |
ACV P-P |
Square wave – 8.4V(2.5MΩ) | ±6% of full scale |
ACV P-P |
Triangle wave – 8.4V(2.5MΩ) | ±6% of full scale |
DCA | 0.12μ/0.3m/3m/30m/300m/6A | ±3% of full scale |
DCA | ±0.06μ/±0.15m/1.5m/15m/150mA | ±7% of full scale |
ACA | 6A | ±5% of full scale |
Resistance | 2k/20k/200k/2M/20M/200MΩ | ±3% of arc |
Low-frequency output | -10~51dB | ±3% of arc |
Frequency characteristic | AC12V range or lower 40Hz to 1 MHz: frequency response within ±5% |
Battery | R6P(AA battery)1.5Vx2, 6F22(9V manganese battery)x1 |
Built-in fuse | F1176 Φ5×20mm 0.5A/250V 1.5kA Ceramic fuse F1177 Φ5×20mm 6.3A/250V 1.5kA Ceramic fuse |
Size/Mass | H165×W106×D46mm/Approx. 375g |
※The value in ( )at DCV and ACV is input resistance
Category: Analog Multitesters
Related products
-
TA 55 ANALOG MULTITESTER – SANWA
$0.00Add To QuoteAutomobile measurement support
30A range supporting automobile measurement
- Improved visibility with color matching of scale and range selector switch
- Continuity check function with beeper sound
- Stand to make easy to read the scale
- Measurable up to DCA30A(300A using an optional clamp)
- Battery check(12V battery only)
-
VS – 100 ANALOG MULTITESTER – SANWA
$0.00Add To QuoteEmploys current-limiting fuse with 100kA of breaking current
- Tester for maintenance and management for electrical equipment that is suitable for measuring high-power low-voltage circuits(500V or lower)
- Built-in current-limiting fuse cuts off the current at 100kA to reduces the risk of arc discharge
- Hard case included
-
YX – 360TRF ANALOG MULTITESTER – SANWA
$0.00Add To QuoteCase and instrument in one body, that brings you a convenience to carry and store
- Drop shock proof meter
- Null(zero center) meter ±5 / ±25 in DCV
- High resistance up to 200MΩ with low voltage
- Protective body cover
- Capacitance, dB, Li measurement
-
SP – 18D ANALOG MULTITESTER – SANWA
$0.00Add To QuoteCase and instrument in one body, that brings you a convenience to carry and store
- Resistance up to 200MΩ can be measured under the low voltage(3V)
- Capacitance measurement from 0.01μF to 1000μF
- Resistance measurement that has 3V of the terminal voltage allows to check an LED
- Battery check
- Front panel protection cover that also works as a stand
-
AP 33 ANALOG MULTITESTER – SANWA
$0.00Add To QuotePocketable Analog Multimeter / Analog Multitester
- Employs test leads woven with nylon. Reduces the possibility of wire damage due to winding and pulling
- The test leads can be winded up and stored
- Battery check function has 2 ranges of 1.5V/9V
- Shock absorbing rubber that is robust against falling
Contact Us
For Quotes:
email: info@bhumika.ca
phone: 613-619-0894