HG 561H INSULATION TESTER – SANWA
Digital 7 ranges
“Smart style”7 ranges Insulation Resistance Tester
- 15V; 21MΩ
- 25V; 21MΩ
- 50V; 21MΩ
- 100V; 110MΩ
- 125V; 110MΩ
- 250V; 110MΩ
- 500V; 110MΩ
- Test voltage selection mode
- LED level meter shows MΩ
- East-to-read LCD with fixed decimal point
- Automatic data hold function
- Has a backlight that is convenient for measuring in a dark place and an LED light that illuminates your work site
Insulation Testers – Digital type
“Smart style”7 ranges Insulation Resistance Tester
- Test voltage selection mode
- LED level meter shows MΩ
- East-to-read LCD with fixed decimal point
- Automatic data hold function
- Has a backlight that is convenient for measuring in a dark place and an LED light that illuminates your work site
※Useful test lead set(TL-BP) for breaker terminal covers during measurement of Insulation Resistance
SAFETY:
IEC61010-1 CAT.III 300V CAT.II 600V,
IEC61557,
IEC61010-032
OPTIONAL ACCESSORIES:
Test Lead Set : TL-BP
Test Lead : TL-28
Adapter : TL-A18, TL-A51
SPECIFICATIONS:
| Function | Measuring range | Best accuracy | Resolultion |
|---|---|---|---|
| MΩ | 15/25/50V 9.99M/21.0MΩ 100/125/250/500V 9.99M/99.9M/110MΩ |
±(2%+5) | 0.1MΩ |
| Rated voltage | 15/25/50/100/125/250/500V | ||
| ACV/DCV | 600V（Automatic measurement for AC/DC) | ±(1.6%+7) | 0.1V |
| Ω | 999.9/99.99k/999.9kΩ | ±(1.5%+7) | 0.1Ω |
| Insulation resistance (Level meter) | 15/25/50V 5 Levels (LED light up/blinking) 100/125/250/500V 7 Levels (LED light up/blinking) |
||
| Continuity | ≦ approx.30Ω: Beep sounds |
| Rated current | 1.0～1.2mA |
| Battery | LR03(AAA alkaline battery)×4 |
| Size/Mass | H139×W91×D29mm/Appox. 230g |
| Earth lead（Black) | Length Approx. 1.8m |
| Safety standard | IEC61010 CAT.Ⅲ 300V CAT.Ⅱ 600V |
Related products
-
M53 INSULATION TESTER – SANWA
Add To QuoteDigital for Elevator maintenance
2 test voltage ranges, for Elevator maintenance
- 500V; 200MΩ
- 15V; 20MΩ
- Auto range
- Auto power off(1min.)
- Low battery power indication
- Remote speed measurement(Speed meter SE9100 is necessary.)
-
MG 500 INSULATION TESTER – SANWA
Add To QuoteDustproof / splashproof(IP54) design
- 500V; 4000MΩ
- 250V; 4000MΩ
- 125V; 4000MΩ
- Hot-line state (30V minimum) detection
- Large volt mark with the buzzer sound
- Automatic data hold function
- Bar graph just like analog meter
- Large display with backlight
- Easy to use & tough body
- IP54
- Continuity test(200mA) function
-
PDM509S Insulation Tester – SANWA
Add To QuoteAnalog single range
500V/100MΩ single range, Lightweight design
- 500V; 100MΩ
- One-shot or continuous measurement push switch
- DCV measurement range (DC60V)
- Auto discharge function
- Inner battery check range
- Shoulder Strap
-
DM1009S INSULATION TESTER – SANWA
Add To QuoteAnalog single range
1000V/2000MΩ single range, Lightweight design
- One-shot or continuous measurement push switch
- DCV measurement range (DC60V)
- Auto discharge function
- Inner battery check range
- Shoulder Strap
-
DM 509S INSULATION TESTER – SANWA
Add To QuoteAnalog single range
500V/1000MΩ single range, Lightweight design
- One-shot or continuous measurement push switch
- DCV measurement range (DC60V)
- Auto discharge function
- Inner battery check range
- Shoulder Strap
