KP1 DIGITAL MULTIMETER – SANWA
Volt Tester
CAT.IV Volt tester
- Self test-checking failures of LCD, disconnection of a lead wire
- EF(Electric Field)detection
- LCD with backlight & LED Light for dark place
- Auto data hold
- Auto power off(1min.)
- Auto identification of AC or DC voltage
KP 1
DIGITAL MULTIMETER / VOLT TESTER
BASIC FEATURES:
- AC True RMS
- Self test – checking failures of LCD, disconnection of a lead wire
- EF (Electric Field) detection
- LCD with backlight & LED light for dark place
- Auto data hold
- Auto power off (1min.)
- Display : numeral display 9999
- Sampling rate : 6 times/sec. (ACV), 5 times/sec. (DCV)
SAFETY :
IEC61010-1, IEC61010-2-030 CAT.IV600V/CAT.III1000V,
IEC61010-2-33, IEC61010-31
SPECIFICATIONS:
| KP1 | Measuring range | Best accuracy | Resolution |
|---|---|---|---|
| DCV | 5～999.9V | ±(0.7%+5) | 0.1V |
| ACV | 5～999.9V | ±(1.7%+5) | 0.1V |
| Continuity | Buzzer sounds at between 20kΩ and 500kΩ Open voltage:approx.0.6V | ||
| EF Detection | A voltage of electric field of about 60V or more is detected. The bar graph and intermittant buzzer beeps change in five steps |
| Display | numeral display 9999 |
| Sampling rate | 6 times/sec.(ACV), 5 times/sec.(DCV) |
| Bandwidth | 45～400Hz |
| Battery | LR03×2 |
| Battery life | Approx.20h |
| Size/Mass | H130×W90×D30mm/approx.205g |
| Safety | IEC61010 CAT. Ⅳ 600 V/CAT. Ⅲ 1000 V |
※When measuring voltage, less than 5 V will not be detected.
※TL-37 is required when using the adapter on the + side (breaker pin side).
Related products
-
PM33a DIGITAL MULTIMETER DIGITAL CLAMP METER – SANWA
Add To QuoteHybrid Digital Multimeters
Hybrid pocket size DMM + clamp meter
- Lightweight approx.160g
- MAX/MIN value hold
- U-shaped clamp sensor, 7mm thick
- DC/AC current measurable up to 100A
- Auto power off(30min.)
-
CD800a DIGITAL MULTIMETER – SANWA
Add To QuoteALL-IN-ONE DMM
Tough body cover
- 4000 counts
- Best accuracy 0.7％
- Auto power off(30min.)(cancelable)
- Low power ohm(input voltage 0.4V)at continuity range
- Solid & portective body cover that can also be used as a tilt stand
- Chip resister holder behind the body cover
-
PC720M DIGITAL MULTIMETER SANWA
Add To QuoteHigh accuracy & built-in memory (PC Link)
87,382 points data logging in built-in memory
- 6000&9999 counts
- Dual display with blacklight
- High speed bar graph
- K type thermocouple temperature measurement -50℃ ～ 1000℃
- Conductance measurement
- MAX/MIN recoding mode
- Caputure (peak hold), Interval: 1ms
- Auto power save (30min.)(cancelable)
-
CD721 CD731 DIGITAL MULTIMETER – SANWA
Add To QuoteNOTE: This item has been discontinued by SANWA. We have a few units that’s available in stock, and are available at great prices.
-
PC710 DIGITAL MULTIMETER – SANWA
Add To QuotePeak hold function, temperature probe included
True RMS, Dual display
- 6000&9999 counts
- Dual display shows voltage/current and its frequency, and AC components and DC components of voltage/current
- EF(Electric Field)detection to indicate signal strength of electric field which surrounds current carrying conductors
- Capture (peak hold), Interval:1ms
- MAX/MIN/AVG recording mode
- K type thermocouple temperature measurement -50℃ ～ 1000℃
- Conductance measurement
- Auto power save (17min.) (cancelable)
