Category
Most Popular Products
KP1 DIGITAL MULTIMETER – SANWA
$0.00
Volt Tester
CAT.IV Volt tester
- Self test-checking failures of LCD, disconnection of a lead wire
- EF(Electric Field)detection
- LCD with backlight & LED Light for dark place
- Auto data hold
- Auto power off(1min.)
- Auto identification of AC or DC voltage
KP 1
DIGITAL MULTIMETER / VOLT TESTER
BASIC FEATURES:
- AC True RMS
- Self test – checking failures of LCD, disconnection of a lead wire
- EF (Electric Field) detection
- LCD with backlight & LED light for dark place
- Auto data hold
- Auto power off (1min.)
- Display : numeral display 9999
- Sampling rate : 6 times/sec. (ACV), 5 times/sec. (DCV)
SAFETY :
IEC61010-1, IEC61010-2-030 CAT.IV600V/CAT.III1000V,
IEC61010-2-33, IEC61010-31
SPECIFICATIONS:
KP1 | Measuring range | Best accuracy | Resolution |
---|---|---|---|
DCV | 5~999.9V | ±(0.7%+5) | 0.1V |
ACV | 5~999.9V | ±(1.7%+5) | 0.1V |
Continuity | Buzzer sounds at between 20kΩ and 500kΩ Open voltage:approx.0.6V | ||
EF Detection | A voltage of electric field of about 60V or more is detected. The bar graph and intermittant buzzer beeps change in five steps |
Display | numeral display 9999 |
Sampling rate | 6 times/sec.(ACV), 5 times/sec.(DCV) |
Bandwidth | 45~400Hz |
Battery | LR03×2 |
Battery life | Approx.20h |
Size/Mass | H130×W90×D30mm/approx.205g |
Safety | IEC61010 CAT. Ⅳ 600 V/CAT. Ⅲ 1000 V |
※When measuring voltage, less than 5 V will not be detected.
※TL-37 is required when using the adapter on the + side (breaker pin side).
Related products
-
RD701 DIGITAL MULTIMETER – SANWA
$0.00Add To QuoteHigh input impedance 1000MΩ
- 4000 counts
- Best accuracy 0.3%
- K type thermocouple temperature measurement -20℃ – 300℃
- Frequency measurement
※Input voltage:20VACrms and under
※Input signal:sing wave or square wave with 40%-70% duty
※Input sensitivity:10Hz~20kHz/0.9Vrms and above
:20kHz~500kHz/2.6Vp or 1.9Vrms and above
:500kHz~1MHz/4.2Vp or 3Vrms and above - Max value hold
- Auto power off (30min.)(cancelable)
- Alarm for importer test lead insertion to current terminal
- Protective holster with wall hanger and lead holder
- Tilt stand
-
PM11 DIGITAL MULTIMETER – SANWA
$0.00Add To QuotePocket type
Test leads fixing feature to enable one-hand measurement
- 4000 counts
- Best accuracy 0.8%
- Analog bar graph
- Test leads storable in the main unit
-
PC20 DIGITAL MULTIMETER – SANWA
$0.00Add To QuoteData processing (PC Link)
AC adapter connectable for long haul measurement
- 4000 counts
- 0.5% best accuracy
- Safety cover for 4・10A terminal
- Safety cap for AC adapter terminal
- Protective holster with wall hanger and lead holder
- Tilt stand
-
PM33a DIGITAL MULTIMETER DIGITAL CLAMP METER – SANWA
$0.00Add To QuoteHybrid Digital Multimeters
Hybrid pocket size DMM + clamp meter
- Lightweight approx.160g
- MAX/MIN value hold
- U-shaped clamp sensor, 7mm thick
- DC/AC current measurable up to 100A
- Auto power off(30min.)
-
PC5000 DIGITAL MULTIMETER – SANWA
$0.00Add To QuoteNOTE: This item has been discontinued by SANWA. We have a few units that’s available in stock, and are available at great prices.
Contact Us
For Quotes:
email: info@bhumika.ca
phone: 613-619-0894