M53 INSULATION TESTER – SANWA
Digital for Elevator maintenance
2 test voltage ranges, for Elevator maintenance
- 500V; 200MΩ
- 15V; 20MΩ
- Auto range
- Auto power off(1min.)
- Low battery power indication
- Remote speed measurement(Speed meter SE9100 is necessary.)
Insulation Testers – For elevator maintenance
2 test voltage ranges for elevator maintenance
BASIC FEATURES:
Test voltage DC500V / 15V
Auto range
Auto power off（1min.）
Low battery power indication
Remote speed measurement（Speed meter SE-9000 is necessary.）
Display : numeral display 1999
OPTIONAL ACCESSORIES:
Carrying case : C-M53
SPECIFICATIONS:
| Function | Measuring range | Accuracy |
|---|---|---|
| MΩ | 2/20/200MΩ（3 auto ranges) | Within±(2%+2） |
| Test voltage | 15/500V | |
| ACV | 200/750V（2 auto ranges) | Within±(1%+0.5%Ranges+1） |
| DCV | 20/750V（2 auto ranges) | Within±(0.5%+0.5%Ranges+1） |
| Rated current | 500V/1.0mA 15V/Approx. 50μA Lowest resistance to maintain the rated measuring voltage: 500V/0.5MΩ or higher, 15V/0.3MΩ or higher |
|
| Display | 1999 | |
| Sampling rate | Approx. 2.5times/sec | |
| Battery | LR6(AA alkaline battery)1.5V×6 | |
| Size/Mass | H175×W115×D55mm/Approx. 600g |
Related products
-
PDM1529S INSULATION TESTER – SANWA
Add To QuoteAnalog 3 ranges
3 test voltage ranges, Lightweight design
- 1000V; 2000MΩ
- 500V; 100MΩ
- 250V; 100MΩ
- Easy viewing and readable graduations
- One-shot or continuous measurement push switch
- DCV measurement range(DCV60V)
- Auto discharge function
- Inner battery check range
- Shoulder strap
-
PDM509S Insulation Tester – SANWA
Add To QuoteAnalog single range
500V/100MΩ single range, Lightweight design
- 500V; 100MΩ
- One-shot or continuous measurement push switch
- DCV measurement range (DC60V)
- Auto discharge function
- Inner battery check range
- Shoulder Strap
-
DG34a DIGITAL MULTIMETER CLAMP METER – SANWA
Add To QuoteMΩ Tester
Hybrid pocket size MΩ tester + clamp meter
- 500V; 400MΩ
- 250V; 400MΩ
- 125V; 400MΩ
- Lightweight approx. 160g
- DCV/ACV measurement functions
- DC/AC current measurable up to 100A
- Test leads holder
- U-shaped clamp sensor, 7mm thick
-
MG1000 INSULATION TESTER – SANWA
Add To QuoteDigital 3 ranges
Automatic determination of the live state of the measurement line
- 1000V; 4000MΩ
- 500V; 4000MΩ
- 250V; 4000MΩ
- Hot-line state(30V minimum) detection
- Large volt mark with the buzzer sound
- Automatic data hold function
- Bar graph just like analog meter
- Large display with backlight
- Easy to use & tough body
- IP54
- Continuity test(200mA) function
-
DM 509S INSULATION TESTER – SANWA
Add To QuoteAnalog single range
500V/1000MΩ single range, Lightweight design
- One-shot or continuous measurement push switch
- DCV measurement range (DC60V)
- Auto discharge function
- Inner battery check range
- Shoulder Strap
