MG 500 INSULATION TESTER – SANWA
Dustproof / splashproof(IP54) design
- 500V; 4000MΩ
- 250V; 4000MΩ
- 125V; 4000MΩ
- Hot-line state (30V minimum) detection
- Large volt mark with the buzzer sound
- Automatic data hold function
- Bar graph just like analog meter
- Large display with backlight
- Easy to use & tough body
- IP54
- Continuity test(200mA) function
Insulation Testers – Digital type
Allows you to measure insulation resistance – more safely by avoiding operation mistakes.
BASIC FEATURES:
- Hot-line state (30V minimum) detection
- Large volt mark with the buzzer sound
- Automatic data hold function
- Bargraph just like analog meter
- Large display with backlight
- Easy to use & tough body
- Display : numeral display 4000
- Sampling rate : 2 times / sec.
SAFETY:
IEC61010 CAT.III 600V
SPECIFICATIONS:
| Function | Measuring range | Best accuracy | Resolution |
|---|---|---|---|
| MΩ | 400k/4M/40M/400M/4000MΩ | ±(3%+4) | 0.001MΩ |
| Rated voltage | 125/250/500V | ||
| ACV/DCV | 600V(AC/DC Automatic detection) | ±(3%+2) | 1V |
| Ω（Continuity) | 4000Ω | ±(3%+3) | 1Ω |
| Ω | 40Ω | ±(3%+10) | 0.01Ω |
| Rated current | 1.0～1.2mA |
| Short-circuit detection | Below 2mA |
| Live circuit detection | At 30V AC/DC or more, inhibits test, buzzer sounds and ALARM indicator lights up |
| Battery | R6P(AA battery)1.5Vx6 |
| Size/Mass | H170×W142×D57mm/Approx. 600g |
| Safety standard | IEC61010 CAT.Ⅲ 600V |
OPTIONAL ACCESSORIES:
Clip adapter : CL-16
Test lead : TLF-120
Related products
-
MG1000 INSULATION TESTER – SANWA
Add To QuoteDigital 3 ranges
Automatic determination of the live state of the measurement line
- 1000V; 4000MΩ
- 500V; 4000MΩ
- 250V; 4000MΩ
- Hot-line state(30V minimum) detection
- Large volt mark with the buzzer sound
- Automatic data hold function
- Bar graph just like analog meter
- Large display with backlight
- Easy to use & tough body
- IP54
- Continuity test(200mA) function
-
HG 561H INSULATION TESTER – SANWA
Add To QuoteDigital 7 ranges
“Smart style”7 ranges Insulation Resistance Tester
- 15V; 21MΩ
- 25V; 21MΩ
- 50V; 21MΩ
- 100V; 110MΩ
- 125V; 110MΩ
- 250V; 110MΩ
- 500V; 110MΩ
- Test voltage selection mode
- LED level meter shows MΩ
- East-to-read LCD with fixed decimal point
- Automatic data hold function
- Has a backlight that is convenient for measuring in a dark place and an LED light that illuminates your work site
-
MG5000 Insulation Tester – SANWA
Add To QuoteDigital 5 ranges
High voltage type
- 5000V; 1000GMΩ
- 2500V; 100GMΩ
- 1000V; 2000MMΩ
- 500V; 1000MMΩ
- 250V; 100MMΩ
- Test voltage DC5000V/2500V/1000V/500V/250V
- Insulation Resistance up to 1TΩ
- Short circuit current up to 4mA
- Dielectric Absorption Ratio(DAR)
- Polarisation Index(PI)
- Auto discharge function
- Data hold(Auto)
- Auto power save
-
M53 INSULATION TESTER – SANWA
Add To QuoteDigital for Elevator maintenance
2 test voltage ranges, for Elevator maintenance
- 500V; 200MΩ
- 15V; 20MΩ
- Auto range
- Auto power off(1min.)
- Low battery power indication
- Remote speed measurement(Speed meter SE9100 is necessary.)
-
PDM 5219S INSULATION TESTER – SANWA
Add To QuoteAnalog 3 ranges
3 test voltage ranges, Lightweight design
- 500V; 100MΩ
- 250V; 100MΩ
- 125V; 100MΩ
- Easy viewing and readable graduations
- One-shot or continuous measurement push switch
- DCV measurement range(DCV60V)
- Auto discharge function
- Inner battery check range
- Shoulder strap
