PC500 DIGITAL MULTIMETER – SANWA
NOTE: This item has been discontinued by SANWA. We have a few units that’s available in stock, and are available at great prices.
PC500
Digital Multimeters High accuracy (PC Link)
5000 Count Bar Graph
BASIC FEATURES:
- Fast Response (5 times / sec. in digit and 60times / sec. in bargraph)
- Selectable 5 sensitivity for Frequency measurement
- Capacitance measurement 0.01nF up to 9999uF
- K-type temperature measurement –50oC ~ 1000oC
- Auto Lead Resistance Calibration
- 0.08% Basic Accuracy at DCV function
- High resolution: 0.01 ohm, Voltage 0.01mV
- RS-232C Interface
- Data hold
- Auto power off (Enable or Disable)
- Fast response Cont. Buzzer
- Tilt stand
- Set off Beeper function
SAFETY:
 IEC 1010-1 CAT III Max.600V, CAT II Max. 1000V EN50081-1, EN50082-1
SPECIFICATIONS:
|
Range |
Accuracy |
||
| Function-DCV | |||
| 50.00mV | ±(0.12%rdg+2dgt) | ||
| 500.0mV | ±(0.06%rdg+2dgt) | ||
| 5.000V | ±(0.08%rdg+2dgt) | ||
| 50.00V | |||
| 500.0V | |||
| 1000V | |||
| Function-ACV | |||
| Bandwidth |
50~60Hz
|
40~500Hz
|
up to 20kHz
|
| 50.00mV | ±(0.5%rdg+5dgt) | ±(0.8%rdg+3dgt) | 0.5dB |
| 500.0mV | |||
| 5.000V | ±(1%rdg+4dgt) | 3dB | |
| 50.00V | |||
| 500.0V | |||
| 1000V | ±(1.0%rdg+40dgt) | Unspec’d | |
| Function-W | |||
| 50.00W | ±(0.4%rdg+6dgt) | ||
| 500.0W | ±(0.2%rdg+3dgt) | ||
| 5.000kW | ±(0.2%rdg+2dgt) | ||
| 50.00kW | |||
| 500.0kW | |||
| 5.000MW | ±(1.0%rdg+3dgt) | ||
| 50.00MW | ±(1.5%rdg+5dgt) | ||
| Open Voltage: <1.3VDC, <3VDC for 50W&500W range | |||
| Function-Capacity | |||
| 50.00nF | ±(0.8%rdg+3dgt) | ||
| 500.0nF | |||
| 5.000µF | ±(1.0%rdg+3dgt) | ||
| 50.00µF | ±(2.0%rdg+3dgt) | ||
| 500.0µF | ±(3.5%rdg+5dgt) | ||
| 9999µF | ±(5.0%rdg+5dgt) | ||
| Function-DCA | |||
| 500.0µA | ±(0.2%rdg+4dgt) | ||
| 5000µA | |||
| 50.00mA | |||
| 500.0mA | |||
| 5.000A | |||
| 10.00A | |||
| Function-ACA | |||
| Bandwidth |
50~60Hz
|
40~1kHz
|
|
| 500.0µA | ±(0.6%rdg+3dgt) | ±(0.8%rdg+4dgt) |
| 5000µA | ||
| 50.00mA | ||
| 500.0mA | ±(1%rdg+3dgt) | ±(1.0%rdg+4dgt) |
| 5.000A | ±(0.6%rdg+3dgt) | |
| 10.00A | ||
| Frequency | ||
| 5.000Hz~125kHz | ±(0.01%rdg+2dgt) | |
| Temperture(PC520M/PC510) | ||
| -50ºC~1000ºC | ±(0.3%rdg+3dgt) | |
| Continity buzzer | ||
| Buzzer sounds at between 20W~120W Open voltage: Approx. 3V | ||
| Diode test | ||
| Open voltage: Approx. 3.5V | ||
rdg : reading / dgt : digits
OPTIONAL ACCESSORIES:
| Clamp Probe (CL33DC) | |
| Clamp Probe (CL-22AD) | |
| Clamp Probe (CL-20D) | |
| *Temperature Probe (T-300PC) | |
| Carrying Case (C-CD) | |
| RS-232C cable (KB-RS2) | |
| Software (PC Link / PC Link Plus) | |
| * | Temperature Probe , which is Platinic thin film (-50 to 300oC), can be used with only PC Link or PC Link Plus through RS-232C cable (KB-RS2). |
Related products
-
RD701 DIGITAL MULTIMETER – SANWA
Add To QuoteHigh input impedance 1000MΩ
- 4000 counts
- Best accuracy 0.3％
- K type thermocouple temperature measurement -20℃ – 300℃
- Frequency measurement
※Input voltage:20VACrms and under
※Input signal:sing wave or square wave with 40％-70％ duty
※Input sensitivity:10Hz～20kHz/0.9Vrms and above
:20kHz～500kHz/2.6Vp or 1.9Vrms and above
:500kHz～1MHz/4.2Vp or 3Vrms and above - Max value hold
- Auto power off (30min.)(cancelable)
- Alarm for importer test lead insertion to current terminal
- Protective holster with wall hanger and lead holder
- Tilt stand
-
PC710 DIGITAL MULTIMETER – SANWA
Add To QuotePeak hold function, temperature probe included
True RMS, Dual display
- 6000&9999 counts
- Dual display shows voltage/current and its frequency, and AC components and DC components of voltage/current
- EF(Electric Field)detection to indicate signal strength of electric field which surrounds current carrying conductors
- Capture (peak hold), Interval:1ms
- MAX/MIN/AVG recording mode
- K type thermocouple temperature measurement -50℃ ～ 1000℃
- Conductance measurement
- Auto power save (17min.) (cancelable)
-
PC LINK 7 SOFTWARE – SANWA
Add To QuoteFor easier operation, higher visibility, and… Furbished GUI.
Enhanced new features such as separated graphs, user restrictions, and etc.
Max 8 channels to the PC connection at the same time.- Automatically detects a port connected with a digital multimeter.
- No additional driver installation required with Windows standard USB drivers.
- The retrieval interval can be set by seconds. The shortest reading interval of 0.2 – 0.3 seconds depending on the digital multimeter measuring function.
- Allows setting for vertical/horizontal zoom, reading at the cursor position, and Y axis split while retrieving data.
- Allows automatic retrieval by schedule setting.
- Allows data saving into CSV files and sending e-mails of alert information with alarm setting.
- Allows data saving into CSV files with the date and time appended.
- Multi-window, separated graphs by each channel
- Allows automatic e-mail of measurement data.
- Allows limited operations depending on the user with usage restriction function.
- Allows conditional recording by event function.
