PC7000 DIGITAL MULTIMETER – SANWA
High accuracy & high resolution (PC Link)
500000 counts for DCV, Dual display
- 50000 & 500000 counts
(Selectable 5-4 / 5 digits 500000 counts for DCV)
- Dual display shows voltage/current and its frequency, and AC components and DC components of voltage/current
- Low-pass filter for variable frequency drive(VFD) circuit
- Capture (peak hold), Interval: 0.8ms
- MAX/MIN/AVG recording mode
- K type thermocouple temperature measurement -50℃ ～ 1000℃
- Conductance measurement
- Auto power save (17min.)(cancelable)
Digital Multimeters – High accuracy (PC Link)
500000 Count for DCV, Dual Display
- 4-4 / 5digits 50000 count
(Selectable 5-4 / 5 digits 500000 count for DCV)
- Dual Display shows voltage/current and its frequency, and AC components and DC
components of voltage/current
- AC True RMS
- Low-pass filter for variable frequency drive(VFD) ã€€circuit
- Current (mA / Î¼A) %4-20mA measurement
- Capture (peak hold) 0.8ms in duration
- MAX, MIN, AVE recording mode
- K type temperature -50â„ƒã€œ1000â„ƒ
â€»Optional accessory K-AD is necessary.
â€»K type temp. sensor K-250PC is included as a standard accessory.
â– Frequency measurement (AC sine wave only)
â– Logic frequency measurement, duty cycle
â– Conductance measurement
â– Dual display with backlight
â– Data hold, Range hold
â– Relative value
â– Optical Link USB interface (optional)
Display : numeral display 50000 & 500000 selectable, bar graph 41 segments
Sampling rate : 5 times/sec. for 50000 count, 1.25 times/sec. for 500000 count, 60 times/sec. for bar graph
Battery life : Approx. 100h (alkaline battery) at DCV range
Max./CAT. II 1000V Max., EN61326-1:2006
Optical PC link cable : KB-USB7
Clamp probe : CL124, CL140, CL-20D, CL-22AD, CL33DC
Temperature probe : T-300PC (PC Link software is necessary.) K-8-250ã€œ800
K type adapter : K-AD
Test lead : TL-21M, TLF-120
Carrying case : C-PC7
Clip adapter : CL-11, CL-13, CL-15a, CL-DG3a, TL-8IC
|PC7000||Measuring range||Best accuracy||Resolution||Input impedance|
|Temperature||-50～1000°C(thermocouple K type)||±(0.3%+20)||0.1°C|
|Continuity||Buzzer sounds at between 20Ω and 200Ω Open voltage:approx.1.3|
|Diode test||Open voltage:approx.3V|
|Display||numeral display 50000 & 500000 selectable, bar graph 41 segments|
|Sampling rate||5 times/sec. for 50000 count, 1.25 times/sec.for 500000 count, 60 times/sec.for bar graph|
|Fuse||11A/1000V IR20kA Φ10× 38 mm
0.4A/1000V IR30kA Φ 6.3× 32 mm
|Battery life||Approx.100h (alkaline battery) at DCV range|
※Accuracies with film capacitor or better, which has low leakage current
CD800a DIGITAL MULTIMETER – SANWAAdd To Quote
Tough body cover
- 4000 counts
- Best accuracy 0.7％
- Auto power off(30min.)(cancelable)
- Low power ohm(input voltage 0.4V)at continuity range
- Solid & portective body cover that can also be used as a tilt stand
- Chip resister holder behind the body cover
PC700 DIGITAL MULTIMETER – SANWAAdd To Quote
High accuracy (PC Link)
Dual display, Best accuracy 0.06%
- 6000&9999 counts
- DC/AC voltage measurement resolution 0.01mV
- Dual display shows voltage/current and its frequency, and AD components and DC components of voltage/current
- High speed bar graph
- Auto power save (30min.)(cancelable)
PC LINK 7 SOFTWARE – SANWAAdd To Quote
For easier operation, higher visibility, and… Furbished GUI.
Enhanced new features such as separated graphs, user restrictions, and etc.
Max 8 channels to the PC connection at the same time.
- Automatically detects a port connected with a digital multimeter.
- No additional driver installation required with Windows standard USB drivers.
- The retrieval interval can be set by seconds. The shortest reading interval of 0.2 – 0.3 seconds depending on the digital multimeter measuring function.
- Allows setting for vertical/horizontal zoom, reading at the cursor position, and Y axis split while retrieving data.
- Allows automatic retrieval by schedule setting.
- Allows data saving into CSV files and sending e-mails of alert information with alarm setting.
- Allows data saving into CSV files with the date and time appended.
- Multi-window, separated graphs by each channel
- Allows automatic e-mail of measurement data.
- Allows limited operations depending on the user with usage restriction function.
- Allows conditional recording by event function.