Category
Most Popular Products
PDM 5219S INSULATION TESTER – SANWA
$0.00
Analog 3 ranges
3 test voltage ranges, Lightweight design
- 500V; 100MΩ
- 250V; 100MΩ
- 125V; 100MΩ
- Easy viewing and readable graduations
- One-shot or continuous measurement push switch
- DCV measurement range(DCV60V)
- Auto discharge function
- Inner battery check range
- Shoulder strap
Insulation Testers
3 test boltage ranges
BASIC FEATURES:
Test voltage DC1000V / 500V /250V
Easy viewing and readable scale graduations
One-shot or continuous measurement push switch
DCV measurement range (DC60V)
Auto discharge function
Inner battery check range
Shoulder Strap
SAFETY:
IEC61010-1 CAT.III 600V
OPTIONAL ACCESSORIES:
Test lead : TLF-120
SPECIFICATIONS:
Scale(MΩ) | 0.02~0.1~50~100MΩ 500V/250V/125V |
|
Accuracy | ± 5% of reading(1st effective measurement range : written in thick print above) ±10% of reading(2nd effective measurement range : written in small type above) |
|
ACV | 600V | |
Tolerance | Within ±5% of the max. scale value(50~60Hz sine wave) | |
DCV | 60V | |
Tolerance | Within ±5% of the max. scale value | |
Rated current | 1.0~1.2mA | |
Battery | 6LF22/6LR61(9V alkaline battery)x1 | |
Size/Mass | H144×W99×D43mm/Approx. 310g | |
Safety standard | IEC61010 CAT.Ⅲ 600V |
Related products
-
M53 INSULATION TESTER – SANWA
$0.00Add To QuoteDigital for Elevator maintenance
2 test voltage ranges, for Elevator maintenance
- 500V; 200MΩ
- 15V; 20MΩ
- Auto range
- Auto power off(1min.)
- Low battery power indication
- Remote speed measurement(Speed meter SE9100 is necessary.)
-
DG 10 INSULATION TESTER – SANWA
$0.00Add To QuoteInsulation Testers Pocket size/Digital Suitable for high voltage insulation measurement at construction sites BASIC FEATURES: Test voltage DC500V / 125V Wide measurement range 1kΩ〜400MΩ High resolution 0.001MΩ(1kΩ) Data hold Auto power save (30min.) Sampling rate : 2 times / sec. for numeral disply, 20 times / sec. for bar graph SPECIFICATIONS:
-
MG1000 INSULATION TESTER – SANWA
$0.00Add To QuoteDigital 3 ranges
Automatic determination of the live state of the measurement line
- 1000V; 4000MΩ
- 500V; 4000MΩ
- 250V; 4000MΩ
- Hot-line state(30V minimum) detection
- Large volt mark with the buzzer sound
- Automatic data hold function
- Bar graph just like analog meter
- Large display with backlight
- Easy to use & tough body
- IP54
- Continuity test(200mA) function
-
PDM509S Insulation Tester – SANWA
$0.00Add To QuoteAnalog single range
500V/100MΩ single range, Lightweight design
- 500V; 100MΩ
- One-shot or continuous measurement push switch
- DCV measurement range (DC60V)
- Auto discharge function
- Inner battery check range
- Shoulder Strap
-
DG34a DIGITAL MULTIMETER CLAMP METER – SANWA
$0.00Add To QuoteMΩ Tester
Hybrid pocket size MΩ tester + clamp meter
- 500V; 400MΩ
- 250V; 400MΩ
- 125V; 400MΩ
- Lightweight approx. 160g
- DCV/ACV measurement functions
- DC/AC current measurable up to 100A
- Test leads holder
- U-shaped clamp sensor, 7mm thick
Contact Us
For Quotes:
email: info@bhumika.ca
phone: 613-619-0894