Category
PM3 DIGITAL MULTIMETER – SANWA
Pocket type
8.5mm thick body with multi-function
- 4000 counts
- Best accuracy 0.7%
- Auto power off(15min.)(cancelable)
PM3
Digital Multimeters Pocket type
8.5mm thick body with multi-function
BASIC FEATURES:
- 3-3 / 4 digits 4000 count
- 0.7% best accuracy
- Capacitance measurement
※Not suitable for measurement of condensers with large leak current. - Frequency measurement (AC sine wave only)
- Duty cycle
- Data hold
- Relative value
- Auto power off (15min.) (cancelable)
- Display : numeral display 4000
- Sampling rate : 3 times / sec.
- AC frequency bandwidth : 40〜400Hz
SAFETY:
IEC61010-1 CAT.II DC AC500V Max.
OPTIONAL ACCESSORIES:
Clip adapter : CL-13, CL-15a
SPECIFICATIONS:
PM3 | Measuring range | Best accuracy | Resolution | Input impedance |
---|---|---|---|---|
DCV | 400m/4/40/400/500V | ±(0.7%+3) | 0.1mV | 10M~100MΩ |
ACV | 4/40/400/500V | ±(2.3%+5) | 0.001V | 10M~11MΩ |
Resistance | 400/4k/40k/400k/4M/40MΩ | ±(2.0%+5) | 0.1Ω | |
Capacitance | 5n/50n/500n/5μ/50μ/200μF | ±(5.0%+10) | 0.001nF | |
Frequency | 9.999/99.99/999.9/9.999k/60.00kHz | ±(0.7%+5) | 0.001Hz | |
Duty cycle | 0.1~99% | |||
Continuity | Buzzer sounds at less than 10Ω~120Ω Open voltage:Approx.0.4V | |||
Diode test | Open voltage:approx.1.5V |
Display | numeral display 4000 |
Sampling rate | 3 times/sec. |
Bandwidth | 40~400Hz |
Bettry | Coin type lithium battery CR2032(3V)x1 |
Bettery life | Approx.150h at DCV |
Size/Mass | H108×W56×D11.5mm/Approx.50g |
Test lead length/Pin tip | Length: approx.0.5m/18mm |
Safety | IEC61010 CAT.ⅡDC/AC500V |
Category: Digital Multimeters
Related products
-
PM7a DIGITAL MULTIMETER – SANWA
Add To QuotePocket size Digital Multimeter / DMM with integrated protective case
- 4000 counts
- Best accuracy 0.7%
- Auto power off(15min.)
- Low power ohm (input voltage 0.4V) at continuity range
- Power saving design
-
PM33a DIGITAL MULTIMETER DIGITAL CLAMP METER – SANWA
Add To QuoteHybrid Digital Multimeters
Hybrid pocket size DMM + clamp meter
- Lightweight approx.160g
- MAX/MIN value hold
- U-shaped clamp sensor, 7mm thick
- DC/AC current measurable up to 100A
- Auto power off(30min.)
-
PC LINK 7 SOFTWARE – SANWA
Add To QuoteFor easier operation, higher visibility, and… Furbished GUI.
Enhanced new features such as separated graphs, user restrictions, and etc.
Max 8 channels to the PC connection at the same time.- Automatically detects a port connected with a digital multimeter.
- No additional driver installation required with Windows standard USB drivers.
- The retrieval interval can be set by seconds. The shortest reading interval of 0.2 – 0.3 seconds depending on the digital multimeter measuring function.
- Allows setting for vertical/horizontal zoom, reading at the cursor position, and Y axis split while retrieving data.
- Allows automatic retrieval by schedule setting.
- Allows data saving into CSV files and sending e-mails of alert information with alarm setting.
- Allows data saving into CSV files with the date and time appended.
- Multi-window, separated graphs by each channel
- Allows automatic e-mail of measurement data.
- Allows limited operations depending on the user with usage restriction function.
- Allows conditional recording by event function.
-
PC7000 DIGITAL MULTIMETER – SANWA
Add To QuoteHigh accuracy & high resolution (PC Link)
500000 counts for DCV, Dual display
- 50000 & 500000 counts
(Selectable 5-4 / 5 digits 500000 counts for DCV) - Dual display shows voltage/current and its frequency, and AC components and DC components of voltage/current
- Low-pass filter for variable frequency drive(VFD) circuit
- Capture (peak hold), Interval: 0.8ms
- MAX/MIN/AVG recording mode
- K type thermocouple temperature measurement -50℃ ~ 1000℃
- Conductance measurement
- Auto power save (17min.)(cancelable)
- 50000 & 500000 counts
-
RD700 DIGITAL MULTIMETER – SANWA
Add To QuoteMultifunction
High input impedance 1000MΩ
- 4000 counts
- Best accuracy0.3%
- K type thermocouple temperature measurement -20℃ – 300℃
- Frequency measurement
※Input voltage:20VACrms and uder
※Input signal:sign wave or square wave with 40% – 70%duty
※Input sensivity:10Hz-20kHz/0.9Vrms and above
:20kHz-500kHz/2.6Vp or 1.9Vrms and above
:500kHz~1MHz/4.2Vp or 3Vrms and above - Max value hold
- Auto power off (30min,)(cancelable)
- Alarm for importer test lead insertion to current terminal
- Protective holster with wall hanger and lead holder
- Tilt stand