Category: Insulation Testers

Showing all 13 results

• 

  DG 10 INSULATION TESTER – SANWA

  Insulation Testers Pocket size/Digital Suitable for high voltage insulation measurement at construction sites BASIC FEATURES: Test voltage DC500V / 125V Wide measurement range 1kΩ〜400MΩ High resolution 0.001MΩ（1kΩ） Data hold Auto power save (30min.) Sampling rate : 2 times / sec. for numeral disply,　20 times / sec. for bar graph SPECIFICATIONS:

  Add To Quote
• 

  DG34a DIGITAL MULTIMETER CLAMP METER – SANWA

  MΩ Tester

  Hybrid pocket size MΩ tester + clamp meter

  • 500V; 400MΩ
  • 250V; 400MΩ
  • 125V; 400MΩ

  • Lightweight approx. 160g
  • DCV/ACV measurement functions
  • DC/AC current measurable up to 100A
  • Test leads holder
  • U-shaped clamp sensor, 7mm thick

  Add To Quote
• 

  DG35a DIGITAL MULTIMETER CLAMP METER – SANWA

  DG35a  MΩ Tester Hybrid pocket size MΩ tester + clamp meter 500V; 40MΩ 250V; 40MΩ 125V; 40MΩ Lightweight approx.160g DCV/ACV measurement functions DCV/AC current measurable up to 100A Test leads holder U-shaped clamp sensor, 7mm thick Specifications DG35a Measuring rage Best accuracy Resolution MΩTest 40MΩ ±(3.0%+3) 0.01MΩ Test voltage 125/250/500V DCA 100A ±(2.0%+5) 0.1A ACA …

  DG35a DIGITAL MULTIMETER CLAMP METER – SANWARead More

  Add To Quote
• 

  DM 509S INSULATION TESTER – SANWA

  Analog single range

  500V/1000MΩ single range, Lightweight design

  • One-shot or continuous measurement push switch
  • DCV measurement range (DC60V)
  • Auto discharge function
  • Inner battery check range
  • Shoulder Strap

  Add To Quote
• 

  DM1009S INSULATION TESTER – SANWA

  Analog single range

  1000V/2000MΩ single range, Lightweight design

  • One-shot or continuous measurement push switch
  • DCV measurement range (DC60V)
  • Auto discharge function
  • Inner battery check range
  • Shoulder Strap

  Add To Quote
• 

  HG 561H INSULATION TESTER – SANWA

  Digital 7 ranges

  “Smart style”7 ranges Insulation Resistance Tester

  • 15V; 21MΩ
  • 25V; 21MΩ
  • 50V; 21MΩ
  • 100V; 110MΩ
  • 125V; 110MΩ
  • 250V; 110MΩ
  • 500V; 110MΩ

  • Test voltage selection mode
  • LED level meter shows MΩ
  • East-to-read LCD with fixed decimal point
  • Automatic data hold function
  • Has a backlight that is convenient for measuring in a dark place and an LED light that illuminates your work site

  Add To Quote
• 

  M53 INSULATION TESTER – SANWA

  Digital for Elevator maintenance

  2 test voltage ranges, for Elevator maintenance

  • 500V; 200MΩ
  • 15V; 20MΩ

  • Auto range
  • Auto power off(1min.)
  • Low battery power indication
  • Remote speed measurement(Speed meter SE9100 is necessary.)

  Add To Quote
• 

  MG 500 INSULATION TESTER – SANWA

  Dustproof / splashproof(IP54) design

  • 500V; 4000MΩ
  • 250V; 4000MΩ
  • 125V; 4000MΩ

  • Hot-line state (30V minimum) detection
  • Large volt mark with the buzzer sound
  • Automatic data hold function
  • Bar graph just like analog meter
  • Large display with backlight
  • Easy to use & tough body
  • IP54
  • Continuity test(200mA) function

  Add To Quote
• 

  MG1000 INSULATION TESTER – SANWA

  Digital 3 ranges

  Automatic determination of the live state of the measurement line

  • 1000V; 4000MΩ
  • 500V; 4000MΩ
  • 250V; 4000MΩ

  • Hot-line state(30V minimum) detection
  • Large volt mark with the buzzer sound
  • Automatic data hold function
  • Bar graph just like analog meter
  • Large display with backlight
  • Easy to use & tough body
  • IP54
  • Continuity test(200mA) function

  Add To Quote
• 

  MG5000 Insulation Tester – SANWA

  Digital 5 ranges

  High voltage type

  • 5000V; 1000GMΩ
  • 2500V; 100GMΩ
  • 1000V; 2000MMΩ
  • 500V; 1000MMΩ
  • 250V; 100MMΩ

  • Test voltage DC5000V/2500V/1000V/500V/250V
  • Insulation Resistance up to 1TΩ
  • Short circuit current up to 4mA
  • Dielectric Absorption Ratio(DAR)
  • Polarisation Index(PI)
  • Auto discharge function
  • Data hold(Auto)
  • Auto power save

  Add To Quote
• 

  PDM 5219S INSULATION TESTER – SANWA

  Analog 3 ranges

  3 test voltage ranges, Lightweight design

  • 500V; 100MΩ
  • 250V; 100MΩ
  • 125V; 100MΩ

  • Easy viewing and readable graduations
  • One-shot or continuous measurement push switch
  • DCV measurement range(DCV60V)
  • Auto discharge function
  • Inner battery check range
  • Shoulder strap

  Add To Quote
• 

  PDM1529S INSULATION TESTER – SANWA

  Analog 3 ranges

  3 test voltage ranges, Lightweight design

  • 1000V; 2000MΩ
  • 500V; 100MΩ
  • 250V; 100MΩ

  • Easy viewing and readable graduations
  • One-shot or continuous measurement push switch
  • DCV measurement range(DCV60V)
  • Auto discharge function
  • Inner battery check range
  • Shoulder strap

  Add To Quote
• 

  PDM509S Insulation Tester – SANWA

  Analog single range

  500V/100MΩ single range, Lightweight design

  • 500V; 100MΩ

  • One-shot or continuous measurement push switch
  • DCV measurement range (DC60V)
  • Auto discharge function
  • Inner battery check range
  • Shoulder Strap

  Add To Quote