Category
Most Popular Products
Product was successfully added to quote request.View List
DG35a DIGITAL MULTIMETER CLAMP METER – SANWA
$0.00
DG35a MΩ Tester
Hybrid pocket size MΩ tester + clamp meter
- 500V; 40MΩ
- 250V; 40MΩ
- 125V; 40MΩ
- Lightweight approx.160g
- DCV/ACV measurement functions
- DCV/AC current measurable up to 100A
- Test leads holder
- U-shaped clamp sensor, 7mm thick
Specifications
DG35a | Measuring rage | Best accuracy | Resolution |
---|---|---|---|
MΩTest | 40MΩ | ±(3.0%+3) | 0.01MΩ |
Test voltage | 125/250/500V | ||
DCA | 100A | ±(2.0%+5) | 0.1A |
ACA | 100A | ±(2.0%+5) | 0.1A |
DCV | 600V | ±(1.1%+3) | 1V |
ACV | 600V | ±(1.6%+7) | 1V |
Display | 3999 |
Sampling rate | 2 times/sec. |
Rated measurement current | 125V/approx.12.5μA 250V/approx.25μA 500V/approx.50μA |
Clamp diameter | Φ10mm |
Battery | LR03×2 |
Size/Mass | H130×W75×D19.9mm/approx.160g |
Test lead length | Length of both red and black test leads is approximately 60 cm directly connected / 18 mm |
Categories: Clamp Meters, Digital Multimeters, Insulation Testers
Related products
-
CD800a DIGITAL MULTIMETER – SANWA
$0.00Add To QuoteALL-IN-ONE DMM
Tough body cover
- 4000 counts
- Best accuracy 0.7%
- Auto power off(30min.)(cancelable)
- Low power ohm(input voltage 0.4V)at continuity range
- Solid & portective body cover that can also be used as a tilt stand
- Chip resister holder behind the body cover
-
PC20 DIGITAL MULTIMETER – SANWA
$0.00Add To QuoteData processing (PC Link)
AC adapter connectable for long haul measurement
- 4000 counts
- 0.5% best accuracy
- Safety cover for 4・10A terminal
- Safety cap for AC adapter terminal
- Protective holster with wall hanger and lead holder
- Tilt stand
-
PC LINK 7 SOFTWARE – SANWA
$0.00Add To QuoteFor easier operation, higher visibility, and… Furbished GUI.
Enhanced new features such as separated graphs, user restrictions, and etc.
Max 8 channels to the PC connection at the same time.- Automatically detects a port connected with a digital multimeter.
- No additional driver installation required with Windows standard USB drivers.
- The retrieval interval can be set by seconds. The shortest reading interval of 0.2 – 0.3 seconds depending on the digital multimeter measuring function.
- Allows setting for vertical/horizontal zoom, reading at the cursor position, and Y axis split while retrieving data.
- Allows automatic retrieval by schedule setting.
- Allows data saving into CSV files and sending e-mails of alert information with alarm setting.
- Allows data saving into CSV files with the date and time appended.
- Multi-window, separated graphs by each channel
- Allows automatic e-mail of measurement data.
- Allows limited operations depending on the user with usage restriction function.
- Allows conditional recording by event function.
-
PC720M DIGITAL MULTIMETER SANWA
$0.00Add To QuoteHigh accuracy & built-in memory (PC Link)
87,382 points data logging in built-in memory
- 6000&9999 counts
- Dual display with blacklight
- High speed bar graph
- K type thermocouple temperature measurement -50℃ ~ 1000℃
- Conductance measurement
- MAX/MIN recoding mode
- Caputure (peak hold), Interval: 1ms
- Auto power save (30min.)(cancelable)
-
RD701 DIGITAL MULTIMETER – SANWA
$0.00Add To QuoteHigh input impedance 1000MΩ
- 4000 counts
- Best accuracy 0.3%
- K type thermocouple temperature measurement -20℃ – 300℃
- Frequency measurement
※Input voltage:20VACrms and under
※Input signal:sing wave or square wave with 40%-70% duty
※Input sensitivity:10Hz~20kHz/0.9Vrms and above
:20kHz~500kHz/2.6Vp or 1.9Vrms and above
:500kHz~1MHz/4.2Vp or 3Vrms and above - Max value hold
- Auto power off (30min.)(cancelable)
- Alarm for importer test lead insertion to current terminal
- Protective holster with wall hanger and lead holder
- Tilt stand
Contact Us
For Quotes:
email: info@bhumika.ca
phone: 613-619-0894