Category
MG5000 Insulation Tester – SANWA
Digital 5 ranges
High voltage type
- 5000V; 1000GMΩ
- 2500V; 100GMΩ
- 1000V; 2000MMΩ
- 500V; 1000MMΩ
- 250V; 100MMΩ
- Test voltage DC5000V/2500V/1000V/500V/250V
- Insulation Resistance up to 1TΩ
- Short circuit current up to 4mA
- Dielectric Absorption Ratio(DAR)
- Polarisation Index(PI)
- Auto discharge function
- Data hold(Auto)
- Auto power save
MG5000 Insulation Tester
Digital 5 ranges
High voltage type
- 5000V; 1000GMΩ
- 2500V; 100GMΩ
- 1000V; 2000MMΩ
- 500V; 1000MMΩ
- 250V; 100MMΩ
- Test voltage DC5000V/2500V/1000V/500V/250V
- Insulation Resistance up to 1TΩ
- Short circuit current up to 4mA
- Dielectric Absorption Ratio(DAR)
- Polarisation Index(PI)
- Auto discharge function
- Data hold(Auto)
- Auto power save
SPECIFICATIONS
Test Voltage(DC) | 250V | 500V | 1000V | 2500V | 5000V | ||
---|---|---|---|---|---|---|---|
Range | 0.0~104.9Ω | 0.0~99.9MΩ 80~1049MΩ |
0.0~99.9MΩ 80~999MΩ 0.80~2.09GΩ |
0.0~99.9MΩ 80~999MΩ 0.80~9.99GΩ 8.0~104.9GΩ |
0.0~99.9MΩ 80~999MΩ 0.80~9.99GΩ 8.0~99.9GΩ |
80~1000GΩ | 1001~1199GΩ |
Accuracy | ±5%+3 | ±5%+3 | ±5%+3 | ±5%+3 | ±5%+3 | ±20% | – |
Open circuit voltage | DC250V 0%~+20% |
DC500V 0%~+20% |
DC1000V 0%~+20% |
DC2500V 0%~+20% |
DC5000V 0%~+20% |
Rated current | 3.0mA±0.5mA |
Short-circuit current |
3mA~4mA |
Voltage measurement | AC:30~1000V(50/60Hz), DC:30~1000V, Accuracy:±(2%+3dgt) |
Battery monitor | 4-step indication |
IP rate | IP54 |
Battery | LR14(C alkaline battery)1.5V×8 |
Size/Mass | H188×W225×D97mm/Approx. 1750g |
Safety standard | IEC61010 CAT.IV 600V |
STANDARD ACCESSORIES INCLUDED
- TEST LEAD SET(TL-5K)
- EARTH LEAD(TL-5K-B : Black, 3m)
- GUARD LEAD(TL-5K-G : Green, 3m)
- LINE LEAD(TL-5K-R : Red , 3m)
- HOOK PROBE(TL-5K-H)
- TEST PROBE(TL-5K-P)
- ALLIGATOR CLIP(TL-5K-A)
Category: Insulation Testers
Related products
-
HG 561H INSULATION TESTER – SANWA
Add To QuoteDigital 7 ranges
“Smart style”7 ranges Insulation Resistance Tester
- 15V; 21MΩ
- 25V; 21MΩ
- 50V; 21MΩ
- 100V; 110MΩ
- 125V; 110MΩ
- 250V; 110MΩ
- 500V; 110MΩ
- Test voltage selection mode
- LED level meter shows MΩ
- East-to-read LCD with fixed decimal point
- Automatic data hold function
- Has a backlight that is convenient for measuring in a dark place and an LED light that illuminates your work site
-
PDM509S Insulation Tester – SANWA
Add To QuoteAnalog single range
500V/100MΩ single range, Lightweight design
- 500V; 100MΩ
- One-shot or continuous measurement push switch
- DCV measurement range (DC60V)
- Auto discharge function
- Inner battery check range
- Shoulder Strap
-
PDM 5219S INSULATION TESTER – SANWA
Add To QuoteAnalog 3 ranges
3 test voltage ranges, Lightweight design
- 500V; 100MΩ
- 250V; 100MΩ
- 125V; 100MΩ
- Easy viewing and readable graduations
- One-shot or continuous measurement push switch
- DCV measurement range(DCV60V)
- Auto discharge function
- Inner battery check range
- Shoulder strap
-
MG1000 INSULATION TESTER – SANWA
Add To QuoteDigital 3 ranges
Automatic determination of the live state of the measurement line
- 1000V; 4000MΩ
- 500V; 4000MΩ
- 250V; 4000MΩ
- Hot-line state(30V minimum) detection
- Large volt mark with the buzzer sound
- Automatic data hold function
- Bar graph just like analog meter
- Large display with backlight
- Easy to use & tough body
- IP54
- Continuity test(200mA) function
-
M53 INSULATION TESTER – SANWA
Add To QuoteDigital for Elevator maintenance
2 test voltage ranges, for Elevator maintenance
- 500V; 200MΩ
- 15V; 20MΩ
- Auto range
- Auto power off(1min.)
- Low battery power indication
- Remote speed measurement(Speed meter SE9100 is necessary.)
Contact Us
For Quotes:
email: info@bhumika.ca
phone: 613-619-0894