Archives: Products

Showing 49–83 of 83 results

MG5000 Insulation Tester – SANWA
Digital 5 ranges

High voltage type

5000V; 1000GMΩ

2500V; 100GMΩ

1000V; 2000MMΩ

500V; 1000MMΩ

250V; 100MMΩ

Test voltage DC5000V/2500V/1000V/500V/250V

Insulation Resistance up to 1TΩ

Short circuit current up to 4mA

Dielectric Absorption Ratio(DAR)

Polarisation Index(PI)

Auto discharge function

Data hold(Auto)

Auto power save
Add To Quote
PC LINK 7 SOFTWARE – SANWA
For easier operation, higher visibility, and… Furbished GUI.
Enhanced new features such as separated graphs, user restrictions, and etc.
Max 8 channels to the PC connection at the same time.

Automatically detects a port connected with a digital multimeter.

No additional driver installation required with Windows standard USB drivers.

The retrieval interval can be set by seconds. The shortest reading interval of 0.2 – 0.3 seconds depending on the digital multimeter measuring function.

Allows setting for vertical/horizontal zoom, reading at the cursor position, and Y axis split while retrieving data.

Allows automatic retrieval by schedule setting.

Allows data saving into CSV files and sending e-mails of alert information with alarm setting.

Allows data saving into CSV files with the date and time appended.

Multi-window, separated graphs by each channel

Allows automatic e-mail of measurement data.

Allows limited operations depending on the user with usage restriction function.

Allows conditional recording by event function.
Add To Quote
PC20 DIGITAL MULTIMETER – SANWA
Data processing (PC Link)

AC adapter connectable for long haul measurement

4000 counts

0.5％ best accuracy

Safety cover for 4・10A terminal

Safety cap for AC adapter terminal

Protective holster with wall hanger and lead holder

Tilt stand
Add To Quote
PC20TK DIY KITS FOR EDUCATION – SANWA
Digital type

General-purpose DMM training kit

4000 count

Safety cover for μA & mA measurement connector

DCV adjustment enables you to adjust the reading easily after assembling.

Data can be outputted by connection to the USB port of a PC. (Optional accessory KB-USB20 is necessary.)

* Sanwa assembly training kits have been developed for educational purpose.
Add To Quote
PC500 DIGITAL MULTIMETER – SANWA

NOTE: This item has been discontinued by SANWA. We have a few units that’s available in stock, and are available at great prices.

Add To Quote
PC5000 DIGITAL MULTIMETER – SANWA

NOTE: This item has been discontinued by SANWA. We have a few units that’s available in stock, and are available at great prices.

Add To Quote
PC700 DIGITAL MULTIMETER – SANWA
High accuracy (PC Link)

Dual display, Best accuracy 0.06%

6000&9999 counts

DC/AC voltage measurement resolution 0.01mV

Dual display shows voltage/current and its frequency, and AD components and DC components of voltage/current

High speed bar graph

Auto power save (30min.)(cancelable)
Add To Quote
PC7000 DIGITAL MULTIMETER – SANWA
High accuracy & high resolution (PC Link)

500000 counts for DCV, Dual display

50000 & 500000 counts
(Selectable 5-4 / 5 digits 500000 counts for DCV)

Dual display shows voltage/current and its frequency, and AC components and DC components of voltage/current

Low-pass filter for variable frequency drive(VFD) circuit

Capture (peak hold), Interval: 0.8ms

MAX/MIN/AVG recording mode

K type thermocouple temperature measurement -50℃ ～ 1000℃

Conductance measurement

Auto power save (17min.)(cancelable)
Add To Quote
PC710 DIGITAL MULTIMETER – SANWA
Peak hold function, temperature probe included

True RMS, Dual display

6000&9999 counts

Dual display shows voltage/current and its frequency, and AC components and DC components of voltage/current

EF(Electric Field)detection to indicate signal strength of electric field which surrounds current carrying conductors

Capture (peak hold), Interval:1ms

MAX/MIN/AVG recording mode

K type thermocouple temperature measurement -50℃ ～ 1000℃

Conductance measurement

Auto power save (17min.) (cancelable)
Add To Quote
PC720M DIGITAL MULTIMETER SANWA
High accuracy & built-in memory (PC Link)

87,382 points data logging in built-in memory

6000&9999 counts

Dual display with blacklight

High speed bar graph

K type thermocouple temperature measurement -50℃ ～ 1000℃

Conductance measurement

MAX/MIN recoding mode

Caputure (peak hold), Interval: 1ms

Auto power save (30min.)(cancelable)
Add To Quote
PC773 DIGITAL MULTIMETER – SANWA
Data processing (PC connectable)

11000 counts, Minimum resolusion 0.01mV,0.01Ω

11000 counts

Best accuracy 0.28%

Double molding of elastic elastomer materials

AC/DC current measurable max.11A

Continuity buzzer and LED lamp

Auto power save(30min.)(cancelable)
Add To Quote
PDM 5219S INSULATION TESTER – SANWA
Analog 3 ranges

3 test voltage ranges, Lightweight design

500V; 100MΩ

250V; 100MΩ

125V; 100MΩ

Easy viewing and readable graduations

One-shot or continuous measurement push switch

DCV measurement range(DCV60V)

Auto discharge function

Inner battery check range

Shoulder strap
Add To Quote
PDM1529S INSULATION TESTER – SANWA
Analog 3 ranges

3 test voltage ranges, Lightweight design

1000V; 2000MΩ

500V; 100MΩ

250V; 100MΩ

Easy viewing and readable graduations

One-shot or continuous measurement push switch

DCV measurement range(DCV60V)

Auto discharge function

Inner battery check range

Shoulder strap
Add To Quote
PDM509S Insulation Tester – SANWA
Analog single range

500V/100MΩ single range, Lightweight design

500V; 100MΩ

One-shot or continuous measurement push switch

DCV measurement range (DC60V)

Auto discharge function

Inner battery check range

Shoulder Strap
Add To Quote
PDR – 302 EARTH TESTER / EARTH RESISTANCE METER – SANWA
Analog Type

Easy to handle & suitable for maintenance facility

Phase detectoin system circuit for stable measurement

Easy self calibration

AC30V range to avoid indication errors caused by leak current

Power saving design with push switch

Auxiliary grounding value excess indicator lamp
Add To Quote
PDR4000 – Earth Tester – SANWA
Digital Type

Easy to read with backlight

Three measurement ranges: 40Ω, 400Ω, 4000Ω

3-pole/2-pole earth resistance measurement
(Optional accessory TL-68 is necessary for 2-pole measurement.)

Auto power off (10 min./Cancelable)

Capable of measuring interference voltage

2mA measuring current
Add To Quote
PM10 DIGITAL MULTIMETER – SANWA

NOTE: This item has been discontinued by SANWA. We have a few units that’s available in stock, and are available at great prices.

Add To Quote
PM11 DIGITAL MULTIMETER – SANWA
Pocket type

Test leads fixing feature to enable one-hand measurement

4000 counts

Best accuracy 0.8％

Analog bar graph

Test leads storable in the main unit
Add To Quote
PM3 DIGITAL MULTIMETER – SANWA
Pocket type

8.5mm thick body with multi-function

4000 counts

Best accuracy 0.7％

Auto power off(15min.)(cancelable)
Add To Quote
PM300 DIGITAL MULTIMETER – SANWA
Ture RMS, Pocket size DMM

6000 counts

MAX/MIN value recording mode

Auto power save (15min.)(cancelable)

Stylish carrying case provided as standard accessory
Add To Quote
PM33a DIGITAL MULTIMETER DIGITAL CLAMP METER – SANWA
Hybrid Digital Multimeters

Hybrid pocket size DMM + clamp meter

Lightweight approx.160g

MAX/MIN value hold

U-shaped clamp sensor, 7mm thick

DC/AC current measurable up to 100A

Auto power off(30min.)
Add To Quote
PM7a DIGITAL MULTIMETER – SANWA
Pocket size Digital Multimeter / DMM with integrated protective case

4000 counts

Best accuracy 0.7％

Auto power off(15min.)

Low power ohm (input voltage 0.4V) at continuity range

Power saving design
Add To Quote
PS 8a Digital Multimeter / Pocket type (Solar Charge battery DMM)
Solar charge battery DMM / Digital Multimeter

4000 counts

Best accuracy 0.7％

Auto power off(15min.)

Low power ohm(input voltage 0.4V)at continuity range
Add To Quote
RD700 DIGITAL MULTIMETER – SANWA
Multifunction

High input impedance 1000MΩ

4000 counts

Best accuracy0.3％

K type thermocouple temperature measurement -20℃ – 300℃

Frequency measurement
※Input voltage：20VACrms and uder
※Input signal：sign wave or square wave with 40％ – 70％duty
※Input sensivity：10Hz-20kHz/0.9Vrms and above
　　　　　：20kHz-500kHz/2.6Vp or 1.9Vrms and above
　　　　　：500kHz～1MHz/4.2Vp or 3Vrms and above

Max value hold

Auto power off (30min,)(cancelable)

Alarm for importer test lead insertion to current terminal

Protective holster with wall hanger and lead holder

Tilt stand
Add To Quote
RD701 DIGITAL MULTIMETER – SANWA
High input impedance 1000MΩ

4000 counts

Best accuracy 0.3％

K type thermocouple temperature measurement -20℃ – 300℃

Frequency measurement
※Input voltage:20VACrms and under
※Input signal:sing wave or square wave with 40％-70％ duty
※Input sensitivity:10Hz～20kHz/0.9Vrms and above
　　　　　 :20kHz～500kHz/2.6Vp or 1.9Vrms and above
　　　　　 :500kHz～1MHz/4.2Vp or 3Vrms and above

Max value hold

Auto power off (30min.)(cancelable)

Alarm for importer test lead insertion to current terminal

Protective holster with wall hanger and lead holder

Tilt stand
Add To Quote
SE300 – Tachometer / Speed Meter – SANWA
Tachometer

Non-contact Digital Tachometer

Designed in pursuit of the ease of holding to enable stable measurement

Long detection distance in non-contact measurement (max. approx.50 cm) enabling measurement from a distance from the rotating object

Auto power OFF function (approx. 2 min., cancellation possible) and Bright backlight

MAX/MIN display function

Fixed installation possible using a commercially available camera tripod

* Contact measurement capability using the optional ENC-3
Add To Quote
SE9100 – Tachometer / Speed Meter – SANWA
Speed Meter

Speed meter for elevator/lift and measurement of escalator emergency stop distance

Speed of high speed elevator can be measured up to 2000.0 m/min

Two independent data hold (CH1/CH2) functions plus maximum value hold function

Memory storage of held value and maximum value

Data hold by external triggering

Movement average value display (average frequency setting can be set at any of 1 to 10 times)

Analog output of measurement value

Measurement of emergency stop distance for a escalator
Add To Quote
SP – 18D ANALOG MULTITESTER – SANWA
Case and instrument in one body, that brings you a convenience to carry and store

Resistance up to 200MΩ can be measured under the low voltage(3V)

Capacitance measurement from 0.01μF to 1000μF

Resistance measurement that has 3V of the terminal voltage allows to check an LED

Battery check

Front panel protection cover that also works as a stand
Add To Quote
SP20 ANALOG MULTITESTER – SANWA
Shockproof meter

Provides DC high voltage and temperature measurement

Has 20 measurement functions to cover general measurement applications

500μF capacitor check function

With a tilt stand that helps to read the meter

Provides DC high voltage and temperature measurement with separately available accessory

Battery check
Add To Quote
SP21 ANALOG MULTITESTER – SANWA
Shockproof meter

With continuity check beeper

Employs shockproof taut-band meter that is not easily damaged even if dropped

Zero center meter for ± DCV measurement

Double protection with fuse and diode to protect the internal circuit from overvoltage

Battery check

With a tilt stand that helps to read the meter
Add To Quote
STD – 5000M CALIBRATOR – SANWA

The STD5000M is a calibrator with soft touch buttons that can generate a desired DC voltage / current, AC voltage / current, resistance, frequency, etc. with a high degree of accuracy and stability. The STD5000M is with a memory function allowing a broad range of uses for the device.

Ranges
■Voltage(DC·AC) : 0〜1000V(6 ranges)
■Current(DC·AC) : 0〜2000mA(6 ranges)
■Resistance1 : 0〜500kΩ(10Ω steps)
■Resistance2 : 24 steps fixed resistance value(4 kinds 6 ranges)
■Hz : 40Hz〜999kHz(5 ranges)

Add To Quote
TA 55 ANALOG MULTITESTER – SANWA
Automobile measurement support

30A range supporting automobile measurement

Improved visibility with color matching of scale and range selector switch

Continuity check function with beeper sound

Stand to make easy to read the scale

Measurable up to DCA30A(300A using an optional clamp)

Battery check(12V battery only)
Add To Quote
VS – 100 ANALOG MULTITESTER – SANWA
Employs current-limiting fuse with 100kA of breaking current

Tester for maintenance and management for electrical equipment that is suitable for measuring high-power low-voltage circuits(500V or lower)

Built-in current-limiting fuse cuts off the current at 100kA to reduces the risk of arc discharge

Hard case included
Add To Quote
YX – 360TRF ANALOG MULTITESTER – SANWA
Case and instrument in one body, that brings you a convenience to carry and store

Drop shock proof meter

Null(zero center) meter ±5 / ±25 in DCV

High resistance up to 200MΩ with low voltage

Protective body cover

Capacitance, dB, Li measurement
Add To Quote
YX – 361TR ANALOG MULTITESTER – SANWA
Variety of measurement functions by using 24-contact switch

Employing 24-contact switch and plus alpha function enable you to enjoy a total of 33 functions

Zero center meter for ± DCV measurement

With LED for continuity check

With OUTPUT measurement terminal (series capacitor inserted)

Battery check

DC current gain (hFE) of transistor can be measured by using separately available hFE connector
Add To Quote