Based in Canada, we deliver across North America

info@bhumika.ca

Test and Measurement Solutions

Archives: Shop

Showing 49–83 of 83 results

  • MG5000 Insulation Tester – SANWA

    $0.00

    Digital 5 ranges

    High voltage type

    • 5000V; 1000GMΩ
    • 2500V; 100GMΩ
    • 1000V; 2000MMΩ
    • 500V; 1000MMΩ
    • 250V; 100MMΩ
    • Test voltage DC5000V/2500V/1000V/500V/250V
    • Insulation Resistance up to 1TΩ
    • Short circuit current up to 4mA
    • Dielectric Absorption Ratio(DAR)
    • Polarisation Index(PI)
    • Auto discharge function
    • Data hold(Auto)
    • Auto power save
    Add To Quote
  • PC LINK 7 SOFTWARE – SANWA

    $0.00

    For easier operation, higher visibility, and… Furbished GUI.
    Enhanced new features such as separated graphs, user restrictions, and etc.
    Max 8 channels to the PC connection at the same time.

    • Automatically detects a port connected with a digital multimeter.
    • No additional driver installation required with Windows standard USB drivers.
    • The retrieval interval can be set by seconds. The shortest reading interval of 0.2 – 0.3 seconds depending on the digital multimeter measuring function.
    • Allows setting for vertical/horizontal zoom, reading at the cursor position, and Y axis split while retrieving data.
    • Allows automatic retrieval by schedule setting.
    • Allows data saving into CSV files and sending e-mails of alert information with alarm setting.
    • Allows data saving into CSV files with the date and time appended.
    • Multi-window, separated graphs by each channel
    • Allows automatic e-mail of measurement data.
    • Allows limited operations depending on the user with usage restriction function.
    • Allows conditional recording by event function.
    Add To Quote
  • PC20 DIGITAL MULTIMETER – SANWA

    $0.00

    Data processing (PC Link)

    AC adapter connectable for long haul measurement

    • 4000 counts
    • 0.5% best accuracy
    • Safety cover for 4・10A terminal
    • Safety cap for AC adapter terminal
    • Protective holster with wall hanger and lead holder
    • Tilt stand
    Add To Quote
  • PC20TK DIY KITS FOR EDUCATION – SANWA

    $0.00

    Digital type

    General-purpose DMM training kit

    • 4000 count
    • Safety cover for μA & mA measurement connector
    • DCV adjustment enables you to adjust the reading easily after assembling.
    • Data can be outputted by connection to the USB port of a PC. (Optional accessory KB-USB20 is necessary.)

    * Sanwa assembly training kits have been developed for educational purpose. 

    Add To Quote
  • PC500 DIGITAL MULTIMETER – SANWA

    $0.00

    NOTE: This item has been discontinued by SANWA. We have a few units that’s available in stock, and are available at great prices.

    Add To Quote
  • PC5000 DIGITAL MULTIMETER – SANWA

    $0.00

    NOTE: This item has been discontinued by SANWA. We have a few units that’s available in stock, and are available at great prices.

    Add To Quote
  • PC700 DIGITAL MULTIMETER – SANWA

    $0.00

    High accuracy (PC Link)

    Dual display, Best accuracy 0.06%

    • 6000&9999 counts
    • DC/AC voltage measurement resolution 0.01mV
    • Dual display shows voltage/current and its frequency, and AD components and DC components of voltage/current
    • High speed bar graph
    • Auto power save (30min.)(cancelable)
    Add To Quote
  • PC7000 DIGITAL MULTIMETER – SANWA

    $0.00

    High accuracy & high resolution (PC Link)

    500000 counts for DCV, Dual display

    • 50000 & 500000 counts
      (Selectable 5-4 / 5 digits 500000 counts for DCV)
    • Dual display shows voltage/current and its frequency, and AC components and DC components of voltage/current
    • Low-pass filter for variable frequency drive(VFD) circuit
    • Capture (peak hold), Interval: 0.8ms
    • MAX/MIN/AVG recording mode
    • K type thermocouple temperature measurement -50℃ ~ 1000℃
    • Conductance measurement
    • Auto power save (17min.)(cancelable)
    Add To Quote
  • PC710 DIGITAL MULTIMETER – SANWA

    $0.00

    Peak hold function, temperature probe included

    True RMS, Dual display

    • 6000&9999 counts
    • Dual display shows voltage/current and its frequency, and AC components and DC components of voltage/current
    • EF(Electric Field)detection to indicate signal strength of electric field which surrounds current carrying conductors
    • Capture (peak hold), Interval:1ms
    • MAX/MIN/AVG recording mode
    • K type thermocouple temperature measurement -50℃ ~ 1000℃
    • Conductance measurement
    • Auto power save (17min.) (cancelable)
    Add To Quote
  • PC720M DIGITAL MULTIMETER SANWA

    $0.00

    High accuracy & built-in memory (PC Link)

    87,382 points data logging in built-in memory

    • 6000&9999 counts
    • Dual display with blacklight
    • High speed bar graph
    • K type thermocouple temperature measurement -50℃ ~ 1000℃
    • Conductance measurement
    • MAX/MIN recoding mode
    • Caputure (peak hold), Interval: 1ms
    • Auto power save (30min.)(cancelable)
    Add To Quote
  • PC773 DIGITAL MULTIMETER – SANWA

    $0.00

    Data processing (PC connectable)

    11000 counts, Minimum resolusion 0.01mV,0.01Ω

    • 11000 counts
    • Best accuracy 0.28%
    • Double molding of elastic elastomer materials
    • AC/DC current measurable max.11A
    • Continuity buzzer and LED lamp
    • Auto power save(30min.)(cancelable)
    Add To Quote
  • PDM 5219S INSULATION TESTER – SANWA

    $0.00

    Analog 3 ranges

    3 test voltage ranges, Lightweight design

    • 500V; 100MΩ
    • 250V; 100MΩ
    • 125V; 100MΩ
    • Easy viewing and readable graduations
    • One-shot or continuous measurement push switch
    • DCV measurement range(DCV60V)
    • Auto discharge function
    • Inner battery check range
    • Shoulder strap
    Add To Quote
  • PDM1529S INSULATION TESTER – SANWA

    $0.00

    Analog 3 ranges

    3 test voltage ranges, Lightweight design

    • 1000V; 2000MΩ
    • 500V; 100MΩ
    • 250V; 100MΩ
    • Easy viewing and readable graduations
    • One-shot or continuous measurement push switch
    • DCV measurement range(DCV60V)
    • Auto discharge function
    • Inner battery check range
    • Shoulder strap
    Add To Quote
  • PDM509S Insulation Tester – SANWA

    $0.00

    Analog single range

    500V/100MΩ single range, Lightweight design

    • 500V; 100MΩ
    • One-shot or continuous measurement push switch
    • DCV measurement range (DC60V)
    • Auto discharge function
    • Inner battery check range
    • Shoulder Strap
    Add To Quote
  • PDR – 302 EARTH TESTER / EARTH RESISTANCE METER – SANWA

    $0.00

    Analog Type

    Easy to handle & suitable for maintenance facility

    • Phase detectoin system circuit for stable measurement
    • Easy self calibration
    • AC30V range to avoid indication errors caused by leak current
    • Power saving design with push switch
    • Auxiliary grounding value excess indicator lamp
    Add To Quote
  • PDR4000 – Earth Tester – SANWA

    $0.00

    Digital Type

    Easy to read with backlight

    • Three measurement ranges: 40Ω, 400Ω, 4000Ω
    • 3-pole/2-pole earth resistance measurement
      (Optional accessory TL-68 is necessary for 2-pole measurement.)
    • Auto power off (10 min./Cancelable)
    • Capable of measuring interference voltage
    • 2mA measuring current
    Add To Quote
  • PM10 DIGITAL MULTIMETER – SANWA

    $0.00

    NOTE: This item has been discontinued by SANWA. We have a few units that’s available in stock, and are available at great prices.

    Add To Quote
  • PM11 DIGITAL MULTIMETER – SANWA

    $0.00

    Pocket type

    Test leads fixing feature to enable one-hand measurement

    • 4000 counts
    • Best accuracy 0.8%
    • Analog bar graph
    • Test leads storable in the main unit
    Add To Quote
  • PM3 DIGITAL MULTIMETER – SANWA

    $0.00

    Pocket type

    8.5mm thick body with multi-function

    • 4000 counts
    • Best accuracy 0.7%
    • Auto power off(15min.)(cancelable)
    Add To Quote
  • PM300 DIGITAL MULTIMETER – SANWA

    $0.00

    Ture RMS, Pocket size DMM

    • 6000 counts
    • MAX/MIN value recording mode
    • Auto power save (15min.)(cancelable)
    • Stylish carrying case provided as standard accessory
    Add To Quote
  • PM33a DIGITAL MULTIMETER DIGITAL CLAMP METER – SANWA

    $0.00

    Hybrid Digital Multimeters

    Hybrid pocket size DMM + clamp meter

    • Lightweight approx.160g
    • MAX/MIN value hold
    • U-shaped clamp sensor, 7mm thick
    • DC/AC current measurable up to 100A
    • Auto power off(30min.)
    Add To Quote
  • PM7a DIGITAL MULTIMETER – SANWA

    $0.00

    Pocket size Digital Multimeter / DMM with integrated protective case

    • 4000 counts
    • Best accuracy 0.7%
    • Auto power off(15min.)
    • Low power ohm (input voltage 0.4V) at continuity range
    • Power saving design
    Add To Quote
  • PS 8a Digital Multimeter / Pocket type (Solar Charge battery DMM)

    $0.00

    Solar charge battery DMM / Digital Multimeter

    • 4000 counts
    • Best accuracy 0.7%
    • Auto power off(15min.)
    • Low power ohm(input voltage 0.4V)at continuity range
    Add To Quote
  • RD700 DIGITAL MULTIMETER – SANWA

    $0.00

    Multifunction

    High input impedance 1000MΩ

    • 4000 counts
    • Best accuracy0.3%
    • K type thermocouple temperature measurement -20℃ – 300℃
    • Frequency measurement
      ※Input voltage:20VACrms and uder
      ※Input signal:sign wave or square wave with 40% – 70%duty
      ※Input sensivity:10Hz-20kHz/0.9Vrms and above
           :20kHz-500kHz/2.6Vp or 1.9Vrms and above
           :500kHz~1MHz/4.2Vp or 3Vrms and above
    • Max value hold
    • Auto power off (30min,)(cancelable)
    • Alarm for importer test lead insertion to current terminal
    • Protective holster with wall hanger and lead holder
    • Tilt stand
    Add To Quote
  • RD701 DIGITAL MULTIMETER – SANWA

    $0.00

    High input impedance 1000MΩ

    • 4000 counts
    • Best accuracy 0.3%
    • K type thermocouple temperature measurement -20℃ – 300℃
    • Frequency measurement
      ※Input voltage:20VACrms and under
      ※Input signal:sing wave or square wave with 40%-70% duty
      ※Input sensitivity:10Hz~20kHz/0.9Vrms and above
             :20kHz~500kHz/2.6Vp or 1.9Vrms and above
             :500kHz~1MHz/4.2Vp or 3Vrms and above
    • Max value hold
    • Auto power off (30min.)(cancelable)
    • Alarm for importer test lead insertion to current terminal
    • Protective holster with wall hanger and lead holder
    • Tilt stand
     
    Add To Quote
  • SE300 – Tachometer / Speed Meter – SANWA

    $0.00

    Tachometer

    Non-contact Digital Tachometer

    • Designed in pursuit of the ease of holding to enable stable measurement
    • Long detection distance in non-contact measurement (max. approx.50 cm) enabling measurement from a distance from the rotating object
    • Auto power OFF function (approx. 2 min., cancellation possible) and Bright backlight
    • MAX/MIN display function
    • Fixed installation possible using a commercially available camera tripod

    * Contact measurement capability using the optional ENC-3

    Add To Quote
  • SE9100 – Tachometer / Speed Meter – SANWA

    $0.00

    Speed Meter

    Speed meter for elevator/lift and measurement of escalator emergency stop distance

    • Speed of high speed elevator can be measured up to 2000.0 m/min
    • Two independent data hold (CH1/CH2) functions plus maximum value hold function
    • Memory storage of held value and maximum value
    • Data hold by external triggering
    • Movement average value display (average frequency setting can be set at any of 1 to 10 times)
    • Analog output of measurement value
    • Measurement of emergency stop distance for a escalator
    Add To Quote
  • SP – 18D ANALOG MULTITESTER – SANWA

    $0.00

    Case and instrument in one body, that brings you a convenience to carry and store

    • Resistance up to 200MΩ can be measured under the low voltage(3V)
    • Capacitance measurement from 0.01μF to 1000μF
    • Resistance measurement that has 3V of the terminal voltage allows to check an LED
    • Battery check
    • Front panel protection cover that also works as a stand
    Add To Quote
  • SP20 ANALOG MULTITESTER – SANWA

    $0.00

    Shockproof meter

    Provides DC high voltage and temperature measurement

    • Has 20 measurement functions to cover general measurement applications
    • 500μF capacitor check function
    • With a tilt stand that helps to read the meter
    • Provides DC high voltage and temperature measurement with separately available accessory
    • Battery check
    Add To Quote
  • SP21 ANALOG MULTITESTER – SANWA

    $0.00

    Shockproof meter

    With continuity check beeper

    • Employs shockproof taut-band meter that is not easily damaged even if dropped
    • Zero center meter for ± DCV measurement
    • Double protection with fuse and diode to protect the internal circuit from overvoltage
    • Battery check
    • With a tilt stand that helps to read the meter
    Add To Quote
  • STD – 5000M CALIBRATOR – SANWA

    $0.00

    The STD5000M is a calibrator with soft touch buttons that can generate a desired DC voltage / current, AC voltage / current, resistance, frequency, etc. with a high degree of accuracy and stability. The STD5000M is with a memory function allowing a broad range of uses for the device.

    Ranges
    ■Voltage(DC·AC) : 0〜1000V(6 ranges)
    ■Current(DC·AC) : 0〜2000mA(6 ranges)
    ■Resistance1 : 0〜500kΩ(10Ω steps)
    ■Resistance2 : 24 steps fixed resistance value(4 kinds 6 ranges)
    ■Hz : 40Hz〜999kHz(5 ranges)

    Add To Quote
  • TA 55 ANALOG MULTITESTER – SANWA

    $0.00

    Automobile measurement support

    30A range supporting automobile measurement

    • Improved visibility with color matching of scale and range selector switch
    • Continuity check function with beeper sound
    • Stand to make easy to read the scale
    • Measurable up to DCA30A(300A using an optional clamp)
    • Battery check(12V battery only)
    Add To Quote
  • VS – 100 ANALOG MULTITESTER – SANWA

    $0.00

    Employs current-limiting fuse with 100kA of breaking current

    • Tester for maintenance and management for electrical equipment that is suitable for measuring high-power low-voltage circuits(500V or lower)
    • Built-in current-limiting fuse cuts off the current at 100kA to reduces the risk of arc discharge
    • Hard case included
    Add To Quote
  • YX – 360TRF ANALOG MULTITESTER – SANWA

    $0.00

    Case and instrument in one body, that brings you a convenience to carry and store

    • Drop shock proof meter
    • Null(zero center) meter ±5 / ±25 in DCV
    • High resistance up to 200MΩ with low voltage
    • Protective body cover
    • Capacitance, dB, Li measurement
    Add To Quote
  • YX – 361TR ANALOG MULTITESTER – SANWA

    $0.00

    Variety of measurement functions by using 24-contact switch

    • Employing 24-contact switch and plus alpha function enable you to enjoy a total of 33 functions
    • Zero center meter for ± DCV measurement
    • With LED for continuity check
    • With OUTPUT measurement terminal (series capacitor inserted)
    • Battery check
    • DC current gain (hFE) of transistor can be measured by using separately available hFE connector
    Add To Quote