Category
Most Popular Products
SP20 ANALOG MULTITESTER – SANWA
$0.00
Shockproof meter
Provides DC high voltage and temperature measurement
- Has 20 measurement functions to cover general measurement applications
- 500μF capacitor check function
- With a tilt stand that helps to read the meter
- Provides DC high voltage and temperature measurement with separately available accessory
- Battery check
SP20
Analog Multitesters Drop shock proof meter
- 20ch measurement ranges
- Capacitance measurement 500μF
- Tilt stand
- DC high voltage and temperature measurement (with optional accessories)
- Bandwidth : 40〜100kHz (AC10V)
SPECIFICATIONS:
Function | Measuring range | Tolerance |
---|---|---|
DCV | 0.25/2.5/5/10/50/100(20kΩ/V)/500V(9kΩ/V) | ±3% of full scale |
ACV | 10/50/250/500V(9kΩ/V) | ±3% of full scale |
DCA | 50μ/2.5m/25m/0.25A | ±3% of full scale |
Resistance | 2k/20k/200k/2MΩ | ±3% of arc |
Capacitance | 500μF | Approximate value |
DC high voltage | DC25kV (Using separately available probe HV-10) | ±20% with probe |
Temperature | -20 to + 200℃ (Using separately available probe T-THP) | ±3% (Using T-THP) |
Battery check | 1.5V (1.0~2.0V) | Approximate value |
Frequency characteristic | AC10V range 40Hz to 100kHz: frequency response within ±3% |
Battery | R6P(AA battery)1.5Vx2 |
Built-in fuse | F0305 Φ6.3x30mm 0.5A/250V 300A Glass fuse |
Size/Mass | H144×W99×D41mm/Approx. 270g |
※The value in ( )at DCV and ACV is input resistance
OPTIONAL ACCESSORIES:
HV probe : HV-10
Temperature probe : T-THP
Carrying case : C-SPH or C-SP
Clip adapter : CL-11, CL-15a, CL-DG3a, TL-8IC
Test lead : TL-91M, TLF-120
Related products
-
VS – 100 ANALOG MULTITESTER – SANWA
$0.00Add To QuoteEmploys current-limiting fuse with 100kA of breaking current
- Tester for maintenance and management for electrical equipment that is suitable for measuring high-power low-voltage circuits(500V or lower)
- Built-in current-limiting fuse cuts off the current at 100kA to reduces the risk of arc discharge
- Hard case included
-
TA 55 ANALOG MULTITESTER – SANWA
$0.00Add To QuoteAutomobile measurement support
30A range supporting automobile measurement
- Improved visibility with color matching of scale and range selector switch
- Continuity check function with beeper sound
- Stand to make easy to read the scale
- Measurable up to DCA30A(300A using an optional clamp)
- Battery check(12V battery only)
-
AU-32 / AU-31 ANALOG MULTITESTER – SANWA
$0.00Add To QuoteAU-32 / AU-31 Analog Multitesters High input impedance Auto range, High input impedance BASIC FEATURES: Auto range selection (V, Ω) Auto polarity High input impedance 1〜10MΩ Series capacitor input ※AU-31 ACV only Auto 0Ω adjustment Inner battery check DC / AC auto selection ※AU-32 only 5 ranges DC / AC current ※AU-32 only Bandwidth : …
-
CP – 7D ANALOG MULTITESTER – SANWA
$0.00Add To QuoteWide scale with mirror for easy reading of measured values
- Wide scale with mirror
- Fixed test leads for safety and operability
- Employs metal oxide film resistors that are high precision, heat resistant, smokeless
- Battery check
- Internal circuit protection with fuse and diode
-
YX – 361TR ANALOG MULTITESTER – SANWA
$0.00Add To QuoteVariety of measurement functions by using 24-contact switch
- Employing 24-contact switch and plus alpha function enable you to enjoy a total of 33 functions
- Zero center meter for ± DCV measurement
- With LED for continuity check
- With OUTPUT measurement terminal (series capacitor inserted)
- Battery check
- DC current gain (hFE) of transistor can be measured by using separately available hFE connector
Contact Us
For Quotes:
email: info@bhumika.ca
phone: 613-619-0894