Category
Most Popular Products
SP20 ANALOG MULTITESTER – SANWA
$0.00
Shockproof meter
Provides DC high voltage and temperature measurement
- Has 20 measurement functions to cover general measurement applications
- 500μF capacitor check function
- With a tilt stand that helps to read the meter
- Provides DC high voltage and temperature measurement with separately available accessory
- Battery check
SP20
Analog Multitesters Drop shock proof meter
- 20ch measurement ranges
- Capacitance measurement 500μF
- Tilt stand
- DC high voltage and temperature measurement (with optional accessories)
- Bandwidth : 40〜100kHz (AC10V)
SPECIFICATIONS:
Function | Measuring range | Tolerance |
---|---|---|
DCV | 0.25/2.5/5/10/50/100(20kΩ/V)/500V(9kΩ/V) | ±3% of full scale |
ACV | 10/50/250/500V(9kΩ/V) | ±3% of full scale |
DCA | 50μ/2.5m/25m/0.25A | ±3% of full scale |
Resistance | 2k/20k/200k/2MΩ | ±3% of arc |
Capacitance | 500μF | Approximate value |
DC high voltage | DC25kV (Using separately available probe HV-10) | ±20% with probe |
Temperature | -20 to + 200℃ (Using separately available probe T-THP) | ±3% (Using T-THP) |
Battery check | 1.5V (1.0~2.0V) | Approximate value |
Frequency characteristic | AC10V range 40Hz to 100kHz: frequency response within ±3% |
Battery | R6P(AA battery)1.5Vx2 |
Built-in fuse | F0305 Φ6.3x30mm 0.5A/250V 300A Glass fuse |
Size/Mass | H144×W99×D41mm/Approx. 270g |
※The value in ( )at DCV and ACV is input resistance
OPTIONAL ACCESSORIES:
HV probe : HV-10
Temperature probe : T-THP
Carrying case : C-SPH or C-SP
Clip adapter : CL-11, CL-15a, CL-DG3a, TL-8IC
Test lead : TL-91M, TLF-120
Related products
-
EM7000 ANALOG MULTITESTER – SANWA
$0.00Add To QuoteHigh sensitivity for measurement of lower capacitance
- High-sensitivity FET electronic tester with high input resistance (2.5M – 12MΩ for DCV) and 0.12μA range (DC current)
- Frequency response against 40Hz to 1MHz of sine wave (AC low voltage)
- Measurement of P-P value (Peak to Peak value) of square wave pulse (duty cycle 20% or higher)
- Wide range resistance measurement from 0.2Ω to 200MΩ
※Zero adjustment needs to be performed before measurement, since the instrument is an electronic tester.
-
CP – 7D ANALOG MULTITESTER – SANWA
$0.00Add To QuoteWide scale with mirror for easy reading of measured values
- Wide scale with mirror
- Fixed test leads for safety and operability
- Employs metal oxide film resistors that are high precision, heat resistant, smokeless
- Battery check
- Internal circuit protection with fuse and diode
-
YX – 360TRF ANALOG MULTITESTER – SANWA
$0.00Add To QuoteCase and instrument in one body, that brings you a convenience to carry and store
- Drop shock proof meter
- Null(zero center) meter ±5 / ±25 in DCV
- High resistance up to 200MΩ with low voltage
- Protective body cover
- Capacitance, dB, Li measurement
-
SP21 ANALOG MULTITESTER – SANWA
$0.00Add To QuoteShockproof meter
With continuity check beeper
- Employs shockproof taut-band meter that is not easily damaged even if dropped
- Zero center meter for ± DCV measurement
- Double protection with fuse and diode to protect the internal circuit from overvoltage
- Battery check
- With a tilt stand that helps to read the meter
-
AU-32 / AU-31 ANALOG MULTITESTER – SANWA
$0.00Add To QuoteAU-32 / AU-31 Analog Multitesters High input impedance Auto range, High input impedance BASIC FEATURES: Auto range selection (V, Ω) Auto polarity High input impedance 1〜10MΩ Series capacitor input ※AU-31 ACV only Auto 0Ω adjustment Inner battery check DC / AC auto selection ※AU-32 only 5 ranges DC / AC current ※AU-32 only Bandwidth : …
Contact Us
For Quotes:
email: info@bhumika.ca
phone: 613-619-0894