TA 55 ANALOG MULTITESTER – SANWA
Automobile measurement support
30A range supporting automobile measurement
- Improved visibility with color matching of scale and range selector switch
- Continuity check function with beeper sound
- Stand to make easy to read the scale
- Measurable up to DCA30A(300A using an optional clamp)
- Battery check(12V battery only)
Analog Multitesters 30A range for Automotive
30A range for automotive
BASIC FEATURES:
- High level panel visibility
- Continuity check buzzer
- Tilt-stand
- Measureable upto DC30A / DC300A with optinal clamp probe
- Bandwidth : 40〜5kHz
OPTIONAL ACCESSORIES:
Clamp probe : CL33DC
Carrying case : C-SPH or C-SP
Clip adapter : CL-11, CL-15a, CL-DG3a, TL-8IC
Test lead : TL-91M, TLF-120
SPECIFICATIONS:
| Function | Measuring range | Tolerance |
|---|---|---|
| DCV | 0.3/3/16/30/60V（20kΩ/V) | ±3% of full scale |
| ACV | 30/120/300V（9kΩ/V) | ±4% of full scale |
| DCA | 0.5/3/30A | ±5% of full scale |
| Resistance | 2k/20k/200k/2MΩ | ±3% of arc |
| Continuity | ≦ approx. 70Ω: Beep sounds. Open circuit voltage: approx.3V | |
| Battery check | For 12V automobile battery |
| Frequency characteristic | 40Hz to 5kHz: frequency response within ±3% |
| Battery | R6P(AA battery)1.5Vx2 |
| Built-in fuse | F0020 Φ6.4x30mm 3A/250V 300A Glass fuse |
| Size/Mass | H142×W97×D38mm/Approx. 300g |
※The value in （ ）at DCV and ACV is input resistance
Related products
-
SP20 ANALOG MULTITESTER – SANWA
Add To QuoteShockproof meter
Provides DC high voltage and temperature measurement
- Has 20 measurement functions to cover general measurement applications
- 500μF capacitor check function
- With a tilt stand that helps to read the meter
- Provides DC high voltage and temperature measurement with separately available accessory
- Battery check
-
SP21 ANALOG MULTITESTER – SANWA
Add To QuoteShockproof meter
With continuity check beeper
- Employs shockproof taut-band meter that is not easily damaged even if dropped
- Zero center meter for ± DCV measurement
- Double protection with fuse and diode to protect the internal circuit from overvoltage
- Battery check
- With a tilt stand that helps to read the meter
-
CX 506a ANALOG MULTITESTER – SANWA
Add To QuoteCapacitance measurement function with built-in transistor oscillator
- Variety of measurement functions by using 26-contact switch
- Capacitance measurement from 50pF to 2000μF
- High input resistance 50kΩ/V (each range of DC3 to 300V)
- DC polarity switchable
-
EM7000 ANALOG MULTITESTER – SANWA
Add To QuoteHigh sensitivity for measurement of lower capacitance
- High-sensitivity FET electronic tester with high input resistance (2.5M – 12MΩ for DCV) and 0.12μA range (DC current)
- Frequency response against 40Hz to 1MHz of sine wave (AC low voltage)
- Measurement of P-P value (Peak to Peak value) of square wave pulse (duty cycle 20% or higher)
- Wide range resistance measurement from 0.2Ω to 200MΩ
※Zero adjustment needs to be performed before measurement, since the instrument is an electronic tester.
-
AP 33 ANALOG MULTITESTER – SANWA
Add To QuotePocketable Analog Multimeter / Analog Multitester
- Employs test leads woven with nylon. Reduces the possibility of wire damage due to winding and pulling
- The test leads can be winded up and stored
- Battery check function has 2 ranges of 1.5V/9V
- Shock absorbing rubber that is robust against falling
