YX – 360TRF ANALOG MULTITESTER – SANWA
Case and instrument in one body, that brings you a convenience to carry and store
- Drop shock proof meter
- Null(zero center) meter ±5 / ±25 in DCV
- High resistance up to 200MΩ with low voltage
- Protective body cover
- Capacitance, dB, Li measurement
Analog Multitesters Drop shock proof meter
Best seller drop shock proof meter
BASIC FEATURES:
- Drop shock proof meter
- Null (zero center) meter ±5 / ±25 in DCV
- High resistance up to 200MΩ with low voltage
- Protective body cover
- Capacitance, dB, Li measurement
- Bandwidth : 30〜100kHz (AC10V)
SPECIFICATIONS:
| Function | Measuring range | Tolerance |
|---|---|---|
| DCV | 0.1（20kΩ/V) 0.25/2.5/10/50（20kΩ/V)/250/1000V（9kΩ/V) |
±5% of full scale ±3% of full scale |
| DCV (NULL) | ±5/25V（40kΩ/V) | ±5% of full scale |
| ACV | 10/50/250/750（9kΩ/V) | ±4% of full scale |
| DCA | 50μ/2.5m/25m/0.25A | *1 ±3% of full scale |
| Resistance | 2k/20k/200k/2MΩ (x1/x10/x100/x1k) 200MΩ (x100k) |
±3% of arc ±5% of arc |
| Capacitance | 10μF | Approximate value |
| dB | -10dB～+22dB (for 10VAC) ～+62dB | Approximate value |
| Load current (LI) | 0-150m/15m/1.5m/150μ/1.5μA | Approximate value |
| DC high voltage | DC25kV (optional probe “HV-10T” is necessary) | – |
| hFE | 1000 at x10 range (optional probe “HFE-6T” is necessary) | – |
| Battery | R6 (IEC) or UM-3 (1.5V)x2 |
| Fuse | Φ5.2x20mm (250V/0.5A) |
| Size/Mass | H159.5×W129×D41.5mm/Approx. 320g |
※The value in ( ）at DCV and ACV is input resistance
*1 Not including the resistance of fuse.
OPTIONAL ACCESSORIES:
hFE probe : HFE-6T
Clip adapter : CL-11, CL-15a, CL-DG3a, TL-8ICHigh voltage probe : HV-10T
Related products
-
VS – 100 ANALOG MULTITESTER – SANWA
Add To QuoteEmploys current-limiting fuse with 100kA of breaking current
- Tester for maintenance and management for electrical equipment that is suitable for measuring high-power low-voltage circuits(500V or lower)
- Built-in current-limiting fuse cuts off the current at 100kA to reduces the risk of arc discharge
- Hard case included
-
SP20 ANALOG MULTITESTER – SANWA
Add To QuoteShockproof meter
Provides DC high voltage and temperature measurement
- Has 20 measurement functions to cover general measurement applications
- 500μF capacitor check function
- With a tilt stand that helps to read the meter
- Provides DC high voltage and temperature measurement with separately available accessory
- Battery check
-
YX – 361TR ANALOG MULTITESTER – SANWA
Add To QuoteVariety of measurement functions by using 24-contact switch
- Employing 24-contact switch and plus alpha function enable you to enjoy a total of 33 functions
- Zero center meter for ± DCV measurement
- With LED for continuity check
- With OUTPUT measurement terminal (series capacitor inserted)
- Battery check
- DC current gain (hFE) of transistor can be measured by using separately available hFE connector
-
AP 33 ANALOG MULTITESTER – SANWA
Add To QuotePocketable Analog Multimeter / Analog Multitester
- Employs test leads woven with nylon. Reduces the possibility of wire damage due to winding and pulling
- The test leads can be winded up and stored
- Battery check function has 2 ranges of 1.5V/9V
- Shock absorbing rubber that is robust against falling
-
EM7000 ANALOG MULTITESTER – SANWA
Add To QuoteHigh sensitivity for measurement of lower capacitance
- High-sensitivity FET electronic tester with high input resistance (2.5M – 12MΩ for DCV) and 0.12μA range (DC current)
- Frequency response against 40Hz to 1MHz of sine wave (AC low voltage)
- Measurement of P-P value (Peak to Peak value) of square wave pulse (duty cycle 20% or higher)
- Wide range resistance measurement from 0.2Ω to 200MΩ
※Zero adjustment needs to be performed before measurement, since the instrument is an electronic tester.
