Category
Accessories & Fuses
SANWA accessories and fuses include test leads, clips and adapters, cases and holsters, temperature probes, a high-voltage probe, USB cables, AC adapters, tachometer accessories and fuses. Bhumika is SANWA’s authorized Canadian distributor and provides quotes for Canada.
Which accessories and fuses are listed?
Representative parts from SANWA’s accessory range, grouped by family. Request a quote with the part number you need.
Test leads
| Model | Name | Note |
|---|---|---|
| ABP301 | Test lead | Breaker Pin; IEC61010 CAT.IV 300V; Length: Approx. 106mm; Pin tip: φ2mmx3.5mm |
| ATL102 | Test lead | IEC61010 CAT.IV300V CAT.II1000V; Length: 2m(Black), 1.7m(Red); Pin tip: 16.5mm; Test pins are covered with removable caps. |
| ATL101 | Test lead | IEC61010 CAT.IV600V CAT.III1000V; Length: 1.15m; Pin tip: 18mm; Test pins are covered with removable caps. |
| TL-5K-15 | Test lead | IEC61010 CAT.IV 600V; Length: 15m |
| TL-21a | Test lead | IEC61010 CAT.III600V CAT.II1000V; Length: 1m; Pin tip: 18mm; Test pins are covered with removable caps. |
| TL-23a | Test lead | IEC61010 CAT.III600V CAT.II1000V (for 10A); Length: Approx. 1.1m; Pin tip: 18mm; Test pins are covered with removable caps. |
| TL-25a | Test lead | IEC61010 CAT.III600V CAT.II1000V (for 20A); Length: Approx. 1.1m; Pin tip: 18mm; Test pins are covered with removable caps. |
| TL-29 | Test lead | IEC61010 CAT.IV1000V; Length: Approx. 1m; Pin tip: 18mm; Test pins are covered with removable caps. |
| TL-61 | Test lead | Length: Approx. 0.9m; Pin tip: 19mm |
| TL-91 | Test lead | Length: Approx. 0.9m; Pin tip: 19mm |
| TL-112a | Test lead | IEC61010 CAT.III600V; Length: Approx. 1.2m; Pin tip: 20mm |
| TL-100-OM | Test lead | Length: Approx. 0.9m; Pin tip: 13mm |
| TLF-120 | Test lead | IEC61010 CAT.III600V CAT.II1000V 500mA/1000V 30kA; φ6.35×32mm Built-in fuse; Length: Approx. 1.4m; Pin tip: 3.5mm |
| TL-509S | Test lead | IEC61010 CAT.III600V; Length: Approx. 1m (TL-28); Pin tip: 18mm (TL-A18a) |
| TL-BP | Test lead | Length: Approx. 1.5m |
| TL-M54 | Test lead | Length: Approx. 1m |
| TL-26 | Test lead | IEC61010 CAT.IV600V CAT.III1000V; Material: Silicon; Length: Approx. 1.2m |
| TL-27 | Test lead | IEC61010 CAT.IV600V CAT.III1000V; Length: Approx. 3m |
| TL-28 | Test lead | IEC61010 CAT.III600V CAT.II1000V; Material: PVC; Length: Approx. 1.2m |
| TL-37 | Test lead | IEC61010 CAT.IV600V CAT.III1000V; Length: Approx. 1m |
| TL-66 | Test lead | Length: Black approx. 5 m; Blue approx. 10 m; Red approx. 20 m |
| TL-KS | Test lead | |
| TL-561 | Test lead | Length: Approx. 120mm; Pin tip: φ2.2mmx4mm |
Clips & adapters
| Model | Name | Note |
|---|---|---|
| AAL301 | Adapter | IEC61010 CAT.IV 300V; Length: Approx. 68mm |
| CL-26 | Adapter | IEC61010 CAT.IV600V; Length: Approx. 95mm |
| CL-27 | Adapter | IEC61010 CAT.III600V; Length: Approx. 70mm |
| CL-27I0R | Adapter | |
| CL-302 | Adapter | Length: Approx. 70mm |
| CL-KS | Adapter | |
| CL-561 | Adapter | IEC61010 CAT.III600V; Length: Approx. 80mm |
| CL-700a | Clip lead | Length: Approx. 0.16m |
| TL-A18a | Adapter | IEC61010 CAT.IV600V CAT.III1000V; Length: Approx. 80mm; Pin tip: φ2mmx18mm; Test pins are covered with removable caps. |
| TL-A51 | Adapter | IEC61010 CAT.III600V; Length: Approx. 110mm; Pin tip: φ3.7mmx3.5mm |
| AMC201 | Adapter | IEC61010 CAT.IV1000V; Length: 60mm; Maximum rated current: 2A |
| CL-14 | Adapter | Use with test lead by inserting pin into socket; Length: Approx. 0.2m; It can't be used for current measurement. |
| CL-15a | Adapter | IEC61010 CAT.III1000V; Use with test lead by inserting pin into socket; Length: Approx. 0.2m |
| CL-506b | Clip lead | For hFE measurement; Length: Approx. 0.3m |
| CL-DG3a | Adapter | IEC61010 CAT.III600V; Use with test lead by inserting pin into socket; Length: Approx. 0.3m |
| TL-9IC | Clip lead | Use with test lead by inserting pin into socket; Length: Approx. 0.2m; It can't be used for current measurement. |
| TL-A4 | Adapter | φ4 banana jack; Length: Approx. 0.2m |
| TL-A7M2 | Adapter | Length: Approx. 60mm; Shape-memory alloy pin tip: φ0.7mmx15mm; Current measurement range is under 1A when using φ0.7mm pin. |
| HFE-6T | hFE probe | hFE: 0 to 1000 range; Length: Approx. 0.3m |
| CL-700SMD | Clip lead | Length: Approx. 0.56m; Tweezers type that is convenient to measure SMD (surface mount device) |
| CL-ER | Adapter | Length: Approx. 0.3m |
| ASJ201 | Safety alligator clip | IEC61010 CAT.IV 1000V MAX.16A; Length: Approx. 130mm |
Cases & holsters
| Model | Name | Note |
|---|---|---|
| C-BP | Carrying case | H150xW69xD23mm |
| C-CA | Carrying case | H180xW150xD50mm |
| C-CD | Carrying case | H190xW145xD70mm |
| C-CL3000 | Carrying case | |
| C-DCL10 | Carrying case | |
| C-DCL1000 | Carrying case | |
| C-DCM2000DR | Carrying case | |
| C-DCM400 | Carrying case | |
| C-DCM60L | Carrying case | |
| C-DCM660 | Carrying case | |
| C-DG3a | Carrying case | H150×W90×D45mm |
| C-KS | Carrying case | |
| C-KS2 | Carrying case | |
| C-M53 | Carrying case | |
| C-PDR302 | Carrying case | |
| C-PC7 | Carrying case | H205xW140xD80mm |
| C-PM300 | Carrying case | |
| C-SE | Carrying case | |
| C-SE300 | Carrying case | |
| C-SPH | Carrying case | H160xW150xD55mm |
| C-VS2 | Carrying case | |
| C-YS | Carrying case | H160xW140xD40mm |
| C-09S | Carrying case | H185xW160xD55mm; Hard case |
| C-302CB | Carrying case | |
| C-77 | Carrying case | H195xW130xD75mm; Soft case |
| C-77H | Carrying case | H190xW140xD70mm; Hard case |
| H-50 | Holster | |
| H-70 | Holster | |
| H-700 | Holster | Light shielding magnet cap included |
| H-701 | Holster | |
| C-PM3 | Carrying case |
Temperature probes
| Model | Name | Note |
|---|---|---|
| K-250CD | Temperature sensor | -50 to 250℃; Type K thermocouple; Accuracy：-20 to 0℃±2.5℃; 0 to 250℃±1.1℃; Length: Approx. 2m |
| K-250PC | Temperature sensor | -50 to 250℃; Type K thermocouple; Accuracy：-20 to 0℃±2.5℃; 0 to 250℃±1.1℃; Length: Approx. 1m |
| K-8-250 | Temperature sensor | -50 to 250℃; Type K thermocouple sensor (Surface type); Sensor: 15×16mm; Length: Approx. 1m |
| K-8-500 | Temperature sensor | -50 to 500℃; Type K thermocouple sensor (Shape type); Sensor: 15×16mm; Length: Approx. 1m |
| T-300PC | Temperature sensor | -50 to 300℃; Thin-film platinum resistance thermometer; Sensor: φ3.2×135mm; Accuracy: ±1.9℃; Length: Approx. 2.2m; Software PC Link7 is necessary to display temperature. |
| T-THP | Temperature sensor | -20 to 200℃; Accuracy (-20 to 130℃)： ±2℃; Accuracy (130 to 200℃)： ±4℃; Thermistor probe; Sensor: φ2.5×31mm; Length: Approx. 0.9m |
High-voltage probe
| Model | Name | Note |
|---|---|---|
| HV-60 | High-voltage measurement probe | 1000MΩ resistor equipped; DC 0 to 30kV; For measurement of anode voltage of a cathode ray tube; Length: Approx. 1.2m |
USB cables
| Model | Name | Note |
|---|---|---|
| LCR-USB2 | Optical link USB cable | Length: Approx. 1.3m; Data retrieval "LCR link software" is only available on the website. |
| KB-USB20 | Optical link USB cable | For PC Link 7; Length: Approx. 1.3m; It can't be used with PC Link/PC Link Plus which has been discontinued since 2011. |
| KB-USB773 | Optical link USB cable | For PC Link 7; Length: Approx. 1.3m; No need to install a driver because it complies with the HID class.; It can't be used with PC Link/PC Link Plus which has been discontinued since 2011. |
| KB-USB7 | Optical link USB cable | For PC Link 7; Length: Approx. 1.3m; No need to install a driver because it complies with the HID class.; It can't be used with PC Link/PC Link Plus which has been discontinued since 2011. |
AC adapters
| Model | Name | Note |
|---|---|---|
| AD-71AC-2 | AC adapter | Length: Approx. 1.9m; Input voltage: AC100V 50/60Hz; Output voltage: AC7.5V 20mA |
| AD-30-3 | AC adapter | Length: Approx. 1.8m; Output voltage: DC12V 0.5mA; Input voltage: AC100V-240V 50/60Hz |
Tachometer accessories
| Model | Name | Note |
|---|---|---|
| SE-T3 | Reflective sticker | Reflective sticker (50 stickers x 2 sheets) |
| ENC-3 | Contact measurement attachment | Set of contact adapter, contact marker, rim speed ring (circumference: 100mm) |
| SE-A30 | Contact measurement attachment | |
| SE-A31 | Contact measurement attachment | Circumference: 100mm; Contact adapter is necessary for connecting with tachometer. |
| SE-L-H | Hold input cable (for speed meter) | For connecting a HOLD jack to an external switch |
| SE-L-O | Analog output cable (for speed meter) | For connecting a OUTPUT jack with an analog recorder |
| SE-0.9 | Speed ring (for speed meter) | Thickness: 0.9mm |
| SE-10 | Speed ring (for speed meter) | Thickness: 10mm |
| SE-220AD | Allen wrench (for speed meter) | For use in attaching/detaching a speed ring or a rotary contact |
Fuses
| Model | Name | Note |
|---|---|---|
| F0301 | Fuse | Glass tube fuse; 0.5A/250V Φ5.2×20㎜ |
| F0305 | Fuse | Glass tube fuse; 0.5A/250V Φ6.3×30㎜ |
| F1176 | Fuse | Ceramic tube fuse; 0.5A/250V Φ5×20㎜ |
| F1198 | Fuse | Ceramic tube fuse; 0.63A/500V Φ6.3×32㎜ |
| F1199 | Fuse | Ceramic tube fuse; 12.5A/500V Φ6.3×32㎜ |
| F1200 | Fuse | Ceramic tube fuse; 0.5A/1000V Φ6.35×32㎜ |
| F1201 | Fuse | Ceramic tube fuse; 10A/1000V Φ10×38㎜ |
| F1203 | Fuse | Ceramic tube fuse; 16A/1000V Φ10×38㎜ |
| F1211 | Fuse | Ceramic tube fuse; 0.4A/1000V Φ6.3×32㎜ |
| F1412 | Fuse | Ceramic tube fuse; 11A/1000V Φ10×38㎜ |
| F2019 | Fuse | Ceramic tube fuse; 0.63A/250V Φ5.2×20㎜ |
Other accessories
| Model | Name | Note |
|---|---|---|
| BH2 | Battery holder | AAA(R03) size battery holder for MG102 (Insulation tester); Batteries are not included. |
| BH1 | Battery holder | AA(R6) size battery holder for MG102 (Insulation tester); Batteries are not included. |
| ACS101 | AC/DC current clamp sensor | AC/DC current clamp sensor; Full-scale 600mV AC/DC voltage output; Measured values displayed on a connected digital multimeter; Auto power off function (approx. 20 min.) * Can be overridden.; Button-operated DCA zero function |
| HM-1 | Hanger magnet | H76xW26xD17.1mm; With strap (Length: Approx. 40cm); It enables measuring instrument to be hung on a metal surface such as distribution board. |
| ST-50 | Strap (for MG series) | |
| Electromagnetic buzzer kit (assembly training kits) | ||
| Piezoelectric buzzer kit (assembly training kits) | ||
| Rubber ring M (voltage detector supporter) | ||
| Rubber ring S (voltage detector supporter) | ||
| Sensitivity adjustment volume cover (voltage detector supporter) | ||
| Magnet for back attachment | ||
What should I consider before buying?
Match accessories to the meter’s model page, where standard and optional items are listed by part number. When choosing test leads, check the CAT rating and length printed for each lead; fuses are listed with their current, voltage and size.
What do buyers usually ask?
How do I find the right test lead?
Use the optional and standard accessory lists on your meter’s model page, then check the CAT rating, length and pin tip listed for the lead.
Are fuses listed with ratings?
Yes, each fuse is listed with its type, current/voltage rating and dimensions.
Can you quote accessories?
Yes, send the part numbers in a quote request.