Authorized SANWA Distributor — Canada613-619-0894[email protected]Serving CanadaRequest a quote
BHUMIKA— Test & Measurement Solutions

SANWA · Detectors

KD3

Pen-style AC voltage detector with a beep, LEDs and two sensitivity settings.

  • 80–600 V AC
  • HIGH / LOW sensitivity
  • Approx. 20 g

The SANWA KD3 is a slim, pen-shaped low voltage detector that signals live AC with a loud beep and blinking red and green LEDs. It detects 80 to 600 V AC at 50/60 Hz, with HIGH sensitivity for jacketed wire and LOW for bare live parts. Bhumika, SANWA’s authorized Canadian distributor, quotes this model for Canada.

View quote basket

SANWA KD3 low voltage detector

Features

  • Detects 80 to 600 V AC, 50/60 Hz
  • Beep plus blinking red and green LEDs on detection
  • HIGH/LOW sensitivity switch: HIGH for jacketed wire, LOW for bare live parts
  • Power LED shows the detector is switched on
  • Auto power off after approx. 5 minutes since the last detection
  • Slim pen-shaped body, approx. 20 g

Specifications

Detection
Detectable voltage range80 to 600 V AC, 50/60 Hz; HIGH: works with IV 2 mm jacketed electrical wire or equivalent; LOW: works with bare live part
Detection indicatorRed and green LEDs blink; beep sound
Volume50 dB or more at 50 cm distance from beep emitter
Light intensityVisible at 50 cm distance from light emitting section with light intensity of 8,000 lux
Dielectric strength1 min. at 2000 V AC, from sensor to grip
Power & Physical
BatteryLR44 (1.5 V) × 2
Battery lifeApprox. 9 hours of continuous operation (approx. 7 mA during detection, approx. 1.5 mA during standby) or 3 years in Auto Power Off or OFF mode
Auto Power Off modeApprox. 5 min. since last detection, 2 µA TYP
Low battery warningBeep sounds for 2 sec. when voltage falls below approx. 2.4 V and then power is turned OFF
Operating temperature/humidity rangeTemperature: –10 °C to 45 °C; humidity: 80 % RH or less (no condensation)
Size / mass134 (H) × 20 (W) × 18 (D) mm / approx. 20 g

Documents