SANWA · Voltage Detector Supporters
KDP10
Clip-on live-wire warning for 7 or 8 inch cable-cutting pliers.
- AC 60–600 V
- Buzzer + LED
- Approx. 13 g
The SANWA KDP10 attaches to 7 or 8 inch pliers or a manual cable cutter and warns with a buzzer and LED when the tool approaches a live sheathed cable (about AC 60–600 V, 50/60 Hz). SANWA states it is not a voltage detector and must not be used for voltage detection. Bhumika, SANWA’s authorized Canadian distributor, quotes this model for Canada.
Features
- Attaches to 7 or 8 inch pliers to warn before cutting a live line
- Buzzer and LED indication
- Detectable with gloves on
- Approx. 5 months battery life in standby
- Sheathed (unshielded) cable only; 50/60 Hz commercial power only
- Not a voltage detector; some pliers cannot be fitted depending on handle shape
Specifications
| Detectable voltage level (representative value) | Approx. AC 60 V to 600 V, 50 Hz/60 Hz (attached to 7/8 inch plier handle) |
|---|---|
| Indicator | Buzzer and LED |
| Cable type for live line detection | Sheathed cable (unshielded cable) |
| Power supply | LR44 1.5 V × 2 |
|---|---|
| Battery life | Approx. 5 months (standby mode) |
| Dimensions / mass | H23 × W77 × D13 mm / approx. 13 g |
Standard accessories
- Rubber ring M
- Rubber ring S
- Sensitivity adjustment volume cover