Category
CD800F DIGITAL MULTIMETER – SANWA
ALL-IN-ONE DMM
True RMS, CAT.Ⅳ DMM
- 6000 counts
- MAX/MIN value recording mode
- Auto power save(15min.)(cancelable)
- Attachment body cover for protection
- EF(Electric Field)detection
- Best accuracy 0.8%
CD800F
True RMS, CAT.Ⅳ DMM / Digital Multimeter
Calibration available products
- 6000 counts
- MAX/MIN value recording mode
- Auto power save(15min.)(cancelable)
- Attachment body cover for protection
- EF(Electric Field)detection
- Best accuracy 0.8%
Specifications
CD800F | Measuring range | Best accuracy | Input impedance |
---|---|---|---|
DCV | 600m/6/60/600/1000V | ±(0.8%+3) | 0.1mV |
ACV | 6/60/600/1000V | ±(1.2%+5) | 0.001V |
Resistance | 600/6k/60k/600k/6M/60MΩ | ±(1.2%+5) | 0.1Ω |
Capacitance | 60n/600n/6μ/60μ/600μF | ±(3.0%+10) | 0.01nF |
Frequency | 99.99/999.9/9.999k/99.99kHz | ±(0.5%+3) | 0.01Hz |
Continuity | Buzzer sounds at between 10Ω~50Ω Open voltage:Approx.0.1V | ||
Electric field sensing | At the standard sensing voltage of about 60V or more,the bar graph and intermittent sound vary in 5 steps | ||
Diode test | Open voltage approx.3.2V |
Display | numeral display 6000 |
Sampling rate | 5 times/sec. |
Bandwidth | 45~500Hz |
Battery | LR03(1.5V)x2 |
Battery life | Approx.600h at DCV range |
Size/Mass | H166×W100×D43mm/360g |
Test lead length/Pin tip | Length: approx. 0.8 m / 19 mm |
Safety | IEC61010 CAT.Ⅳ 1000V |
Category: Digital Multimeters
Related products
-
PC5000 DIGITAL MULTIMETER – SANWA
Add To QuoteNOTE: This item has been discontinued by SANWA. We have a few units that’s available in stock, and are available at great prices.
-
PC LINK 7 SOFTWARE – SANWA
Add To QuoteFor easier operation, higher visibility, and… Furbished GUI.
Enhanced new features such as separated graphs, user restrictions, and etc.
Max 8 channels to the PC connection at the same time.- Automatically detects a port connected with a digital multimeter.
- No additional driver installation required with Windows standard USB drivers.
- The retrieval interval can be set by seconds. The shortest reading interval of 0.2 – 0.3 seconds depending on the digital multimeter measuring function.
- Allows setting for vertical/horizontal zoom, reading at the cursor position, and Y axis split while retrieving data.
- Allows automatic retrieval by schedule setting.
- Allows data saving into CSV files and sending e-mails of alert information with alarm setting.
- Allows data saving into CSV files with the date and time appended.
- Multi-window, separated graphs by each channel
- Allows automatic e-mail of measurement data.
- Allows limited operations depending on the user with usage restriction function.
- Allows conditional recording by event function.
-
RD701 DIGITAL MULTIMETER – SANWA
Add To QuoteHigh input impedance 1000MΩ
- 4000 counts
- Best accuracy 0.3%
- K type thermocouple temperature measurement -20℃ – 300℃
- Frequency measurement
※Input voltage:20VACrms and under
※Input signal:sing wave or square wave with 40%-70% duty
※Input sensitivity:10Hz~20kHz/0.9Vrms and above
:20kHz~500kHz/2.6Vp or 1.9Vrms and above
:500kHz~1MHz/4.2Vp or 3Vrms and above - Max value hold
- Auto power off (30min.)(cancelable)
- Alarm for importer test lead insertion to current terminal
- Protective holster with wall hanger and lead holder
- Tilt stand
-
PC20 DIGITAL MULTIMETER – SANWA
Add To QuoteData processing (PC Link)
AC adapter connectable for long haul measurement
- 4000 counts
- 0.5% best accuracy
- Safety cover for 4・10A terminal
- Safety cap for AC adapter terminal
- Protective holster with wall hanger and lead holder
- Tilt stand
-
PM11 DIGITAL MULTIMETER – SANWA
Add To QuotePocket type
Test leads fixing feature to enable one-hand measurement
- 4000 counts
- Best accuracy 0.8%
- Analog bar graph
- Test leads storable in the main unit
Contact Us
For Quotes:
email: info@bhumika.ca
phone: 613-619-0894