CX 506a ANALOG MULTITESTER – SANWA
Capacitance measurement function with built-in transistor oscillator
- Variety of measurement functions by using 26-contact switch
- Capacitance measurement from 50pF to 2000μF
- High input resistance 50kΩ/V (each range of DC3 to 300V)
- DC polarity switchable
Analog Multitesters Multifunctional model
Capacitor & Transistor checker (built-in oscillator)
BASIC FEATURES:
- 26ch switch, wide range measurement
- Capacitance measurement 50pF〜2000μF
- High input impedance 50kΩ / V (DC3〜300Vrange)
- Switchable DC polarity
- Bandwidth : 40Hz〜30kHz (3V and 12V),　40Hz〜10kHz (30V range)
SAFETY:
IEC61010-1 (EN61010-1) 2001-02 CAT.III 600V Max
OPTIONAL ACCESSORIES:
HV probe : HV-60
Carrying case : C-CA
Clip adapter : CL-11, CL-13, CL-15a, CL-DG3a, TL-8IC
Test lead : TL-21M, TLF-120
SPECIFICATIONS:
| Function | Measuring range | Tolerance |
|---|---|---|
| DCV | 120m（4kΩ）/3/12/30/120 300（50kΩ/V）/1000V（15kΩ/V) | 120m:±4% ±2.5% of full scale |
| ACV | 3/12/30/120/300/750V（8kΩ/V) | ±3% of full scale (3/12V:±4% of full scale) |
| DCV | 30μ/0.3m/3m/30m/0.3A | ±2.5% of full scale (30μ/0.3mA:±3% of full scale) |
| Resistance | 5k/50k/500k/5M/50MΩ | Within ±3% of arc |
| Capacitance | C1：50p～0.2μF C2：0.01μ～20μF C3:1～2000μF |
C1/C2: ±6% of arc C3: Approximate value |
| DC current gain hFE | Transistor hFE: 0 to 1000 | Approximate value |
| Frequency characteristic | AC12V range or lower 40Hz to 30kHz, AC30V range 40Hz to 10 kHz: frequency response within ±3% |
| Battery | R6P(AA battery)1.5Vx2, 6F22(9V manganese battery)x1 |
| Built-in fuse | F1176 Φ5x20mm 0.5A/250 V 1.5kA Ceramic fuse |
| Size/Mass | H165×W106×D46mm/Approx. 370g |
※The value in （ ）at DCV and ACV is input resistance
Related products
-
SP – 18D ANALOG MULTITESTER – SANWA
Add To QuoteCase and instrument in one body, that brings you a convenience to carry and store
- Resistance up to 200MΩ can be measured under the low voltage(3V)
- Capacitance measurement from 0.01μF to 1000μF
- Resistance measurement that has 3V of the terminal voltage allows to check an LED
- Battery check
- Front panel protection cover that also works as a stand
-
SP21 ANALOG MULTITESTER – SANWA
Add To QuoteShockproof meter
With continuity check beeper
- Employs shockproof taut-band meter that is not easily damaged even if dropped
- Zero center meter for ± DCV measurement
- Double protection with fuse and diode to protect the internal circuit from overvoltage
- Battery check
- With a tilt stand that helps to read the meter
-
AP 33 ANALOG MULTITESTER – SANWA
Add To QuotePocketable Analog Multimeter / Analog Multitester
- Employs test leads woven with nylon. Reduces the possibility of wire damage due to winding and pulling
- The test leads can be winded up and stored
- Battery check function has 2 ranges of 1.5V/9V
- Shock absorbing rubber that is robust against falling
-
SP20 ANALOG MULTITESTER – SANWA
Add To QuoteShockproof meter
Provides DC high voltage and temperature measurement
- Has 20 measurement functions to cover general measurement applications
- 500μF capacitor check function
- With a tilt stand that helps to read the meter
- Provides DC high voltage and temperature measurement with separately available accessory
- Battery check
-
CP – 7D ANALOG MULTITESTER – SANWA
Add To QuoteWide scale with mirror for easy reading of measured values
- Wide scale with mirror
- Fixed test leads for safety and operability
- Employs metal oxide film resistors that are high precision, heat resistant, smokeless
- Battery check
- Internal circuit protection with fuse and diode
