DCM-400 CLAMP METER – SANWA
Low cost & DMM functions
- 4000 counts, 42 segments analog bar graph
- Frequency measurement by clamping and using test lead
- Auto power off (30 min.)
- Low battery power indication
Clamp Meters
Low cost & DMM functions
BASIC FEATURES:
4000 count / 42 segment analog bar graph
Frequency measurement by clamping and using 　test lead
Data hold
Continuity check buzzer
Auto power off (30min.)
Low battery power indication
Sampling rate : 2 times / sec. for numeral display
AC frequency
Bandwidth : 50〜60Hz (ACA : 1.9%±5), 60〜500Hz (ACA :2.5%±5), 50〜500Hz (ACV)
SAFETY:
IEC61010-1 (EN61010-1) 2001-02 CAT.III300V. / CAT.II 600V
SPECIFICATIONS:
OPTIONAL ACCESSORIES:
Clip adapter : CL-11, CL-13, CL-15a, CL-DG3a, TL-8IC
Test lead : TL-21M, TLF-120
SPECIFICATIONS:
| Function | Measuring range | Best accuracy | Resistance |
|---|---|---|---|
| ACA | 40/400A | ±(1.9%+5) | 0.01A |
| ACV | 400/600V | ±(1.5%+5) | 0.1V |
| DCV | 400/600V | ±(1%+2) | 0.1V |
| Resistance | 400Ω | ±(1%+2) | 0.1Ω |
| Frequency (A) | 20～4k/10kHz | ±(0.1%+1) | 1Hz |
| Frequency (V) | 4k/40k/400k/1MHz | ±(0.1%+1) | 0.001kHz |
| Continuity | Buzzer sounds at less than approx. 40Ω Open voltage: approx. 1.5V | ||
| Sampling rate | 2 times/sec., 20 times/sec. for bar graph |
| Bandwidth | ACA 50/60Hz: ±(1.9%+5） 60-500Hz: ±(2.5%+5） ACV 50-500Hz: ±(1.5%+5) |
| Display | 4000 |
| Clamp diameter/Conductor size | Φ25mm/10×34mm |
| Battery | R03×2 |
| Battery life | Approx. 150 hrs. (Zinc-carbon battery) |
| Size/Mass | H193×W50×D28mm/Approx. 230g |
| Safety standards | IEC61010 CAT.Ⅲ300V CAT.Ⅱ600V |
Related products
-
DCL 1200R CLAMP METER – SANWA
Add To QuoteLarge diameter CT & DMM functions
- Lightweight approx. 290g
- Large LCD with backlight
- Easy to use large size data hold button
- Non-contact voltage detection function
- Auto V/Ω detection
-
DG35a DIGITAL MULTIMETER CLAMP METER – SANWA
Add To QuoteDG35a MΩ Tester Hybrid pocket size MΩ tester + clamp meter 500V; 40MΩ 250V; 40MΩ 125V; 40MΩ Lightweight approx.160g DCV/ACV measurement functions DCV/AC current measurable up to 100A Test leads holder U-shaped clamp sensor, 7mm thick Specifications DG35a Measuring rage Best accuracy Resolution MΩTest 40MΩ ±(3.0%+3) 0.01MΩ Test voltage 125/250/500V DCA 100A ±(2.0%+5) 0.1A ACA …
-
DCM-600DR CLAMP METER – SANWA
Add To QuoteSuitable for maintenance of vehicle, hybrid vehicle, EV & DMM functions
- AC/DC current measurable max. 600A
- Peak hold (Interval: 1ms)
- Auto power save (30min./Cancelable)
-
DCL11R Clamp Meter – SANWA
Add To QuoteRMS mini clamp meter with backlight
- Compact pocket size
- Auto power off (15 min./Cancelable)
-
DCL31DR – Digital Clamp Meter – SANWA
Add To QuoteDC/AC RMS mini clamp meter with peak hold function
- Compact pocket size
- Auto power off (15min./Cancelable)
