Category
DM1009S INSULATION TESTER – SANWA
Analog single range
1000V/2000MΩ single range, Lightweight design
- One-shot or continuous measurement push switch
- DCV measurement range (DC60V)
- Auto discharge function
- Inner battery check range
- Shoulder Strap
Insulation Testers
1000V/2000MΩ single range, Lightweight design
BASIC FEATURES:
- One-shot or continuous measurement push switch
- DCV measurement range (DC60V)
- Auto discharge function
- Inner battery check range
- Shoulder Strap
SPECIFICATIONS:
Scale(MΩ) | 1~2~1000~2000MΩ | |
Tolerance | ± 5% of reading(1st effective measurement range : written in thick print above) ±10% of reading(2nd effective measurement range : written in small type above) |
|
ACV | 600V | |
Tolerance | Within ±5% of the max. scale value(50~60Hz sine wave) | |
DCV | 60V | |
Tolerance | Within ±5% of the max. scale value | |
Rated current | 1.0~1.2mA | |
Battery | 6LF22/6LR61(9V alkaline battery)x1 | |
Size/Mass | H144×W99×D43mm/Approx. 310g | |
Safety standard | IEC61010 CAT.Ⅲ 600V |
Related products
-
DG 10 INSULATION TESTER – SANWA
Add To QuoteInsulation Testers Pocket size/Digital Suitable for high voltage insulation measurement at construction sites BASIC FEATURES: Test voltage DC500V / 125V Wide measurement range 1kΩ〜400MΩ High resolution 0.001MΩ(1kΩ) Data hold Auto power save (30min.) Sampling rate : 2 times / sec. for numeral disply, 20 times / sec. for bar graph SPECIFICATIONS:
-
HG 561H INSULATION TESTER – SANWA
Add To QuoteDigital 7 ranges
“Smart style”7 ranges Insulation Resistance Tester
- 15V; 21MΩ
- 25V; 21MΩ
- 50V; 21MΩ
- 100V; 110MΩ
- 125V; 110MΩ
- 250V; 110MΩ
- 500V; 110MΩ
- Test voltage selection mode
- LED level meter shows MΩ
- East-to-read LCD with fixed decimal point
- Automatic data hold function
- Has a backlight that is convenient for measuring in a dark place and an LED light that illuminates your work site
-
MG 500 INSULATION TESTER – SANWA
Add To QuoteDustproof / splashproof(IP54) design
- 500V; 4000MΩ
- 250V; 4000MΩ
- 125V; 4000MΩ
- Hot-line state (30V minimum) detection
- Large volt mark with the buzzer sound
- Automatic data hold function
- Bar graph just like analog meter
- Large display with backlight
- Easy to use & tough body
- IP54
- Continuity test(200mA) function
-
M53 INSULATION TESTER – SANWA
Add To QuoteDigital for Elevator maintenance
2 test voltage ranges, for Elevator maintenance
- 500V; 200MΩ
- 15V; 20MΩ
- Auto range
- Auto power off(1min.)
- Low battery power indication
- Remote speed measurement(Speed meter SE9100 is necessary.)
-
DM 509S INSULATION TESTER – SANWA
Add To QuoteAnalog single range
500V/1000MΩ single range, Lightweight design
- One-shot or continuous measurement push switch
- DCV measurement range (DC60V)
- Auto discharge function
- Inner battery check range
- Shoulder Strap
Contact Us
For Quotes:
email: info@bhumika.ca
phone: 613-619-0894