DCL 1200R CLAMP METER – SANWA
Large diameter CT & DMM functions
- Lightweight approx. 290g
- Large LCD with backlight
- Easy to use large size data hold button
- Non-contact voltage detection function
- Auto V/Ω detection
Large diameter CT & DMM functions
BASIC FEATURES:
- Lightweight approx. 290g
- Large LCD with backlight
- Easy to use large size data hold button
- Non-contact voltage detection function
- Auto V/Ω detection
SAFETY:
IEC61010-2-032 (2002) CAT.III600V Max.
OPTIONAL ACCESSORIES:
Clip adapter : CL-11, CL-13, CL-15a, CL-DG3a, TL-8IC
Test lead : TL-21M, TLF-120
SPECIFICATIONS:
| Function | Measuring range | Best accuracy | Resolution |
|---|---|---|---|
| ACA | 400/1200A | ±(1.7%+5) | 0.1A |
| DCV | 6/60/600V | ±(0.7%+3) | 0.001V |
| ACV | 6/60/600V | ±(1.7%+5) | 0.001V |
| Auto resistance | 6k/60k/600k/6MΩ | ±(1.2%+4) | 1Ω |
| Resistance | 600Ω | ±(2.2%+8) | 0.1Ω |
| Frequency | 9.999/99.99/9.999k/30kHz | ±(0.6%+4) | 0.001Hz |
| Capacitance | 100n/1000n/10μ/100μ/2000μF | ±(3.7%+5) | 0.1nF |
| Continuity | Buzzer sounds at between 0Ω and 155Ω (±145Ω) Open voltage: approx. 0.4V | ||
| Diode test | Open voltage: approx. 1.6V | ||
| Voltage detection | Buzzer sounds and “-” is shown on LCD. Input sensitivity: approx. 20V or over (50/60Hz) |
| Sampling rate | 5 times/sec. |
| Bandwidth | ACA 50/60Hz ACV 50-500Hz |
| Display | 6000 |
| Clamp diameter/Conductor size | Φ42mm/20×54mm |
| Battery | R03×2 |
| Battery life | Approx. 90 hrs. at DCV (Alkaline battery/Backlight off) |
| Size/Mass | H238×W95×D45mm/Approx. 290g |
| Safety standards | IEC61010 CAT.Ⅲ 600V |
Related products
-
DG35a DIGITAL MULTIMETER CLAMP METER – SANWA
Add To QuoteDG35a MΩ Tester Hybrid pocket size MΩ tester + clamp meter 500V; 40MΩ 250V; 40MΩ 125V; 40MΩ Lightweight approx.160g DCV/ACV measurement functions DCV/AC current measurable up to 100A Test leads holder U-shaped clamp sensor, 7mm thick Specifications DG35a Measuring rage Best accuracy Resolution MΩTest 40MΩ ±(3.0%+3) 0.01MΩ Test voltage 125/250/500V DCA 100A ±(2.0%+5) 0.1A ACA …
-
DCM2000DR
Add To QuoteDC/AC current measurable max. 2000A, CAT.IV 1000V
- Dual display shows voltage/current and its frequency
- EF (Electric Field) detection
- VFD (Variable Frequency Drive) frequency measurement
- Low input impedance voltage measurement capable of attenuating the effects of ghost voltages
- Peak hold (Interval: 5 ms)
- Auto power save (30 min./Cancelable)
-
CAM600S CLAMP METER – SANWA
Add To QuoteAnalog type, AC current measurable max. 600A
- Long analog pointer with “pointer lock” function
-
DCM-600DR CLAMP METER – SANWA
Add To QuoteSuitable for maintenance of vehicle, hybrid vehicle, EV & DMM functions
- AC/DC current measurable max. 600A
- Peak hold (Interval: 1ms)
- Auto power save (30min./Cancelable)
-
DCM-400 CLAMP METER – SANWA
Add To QuoteLow cost & DMM functions
- 4000 counts, 42 segments analog bar graph
- Frequency measurement by clamping and using test lead
- Auto power off (30 min.)
- Low battery power indication
