MG1000 INSULATION TESTER – SANWA
Digital 3 ranges
Automatic determination of the live state of the measurement line
- 1000V; 4000MΩ
- 500V; 4000MΩ
- 250V; 4000MΩ
- Hot-line state(30V minimum) detection
- Large volt mark with the buzzer sound
- Automatic data hold function
- Bar graph just like analog meter
- Large display with backlight
- Easy to use & tough body
- IP54
- Continuity test(200mA) function
Insulation Testers – Digital type
Allows you to measure insulation resistance more safely by avoiding operation mistakes.
BASIC FEATURES:
Hot-line state (30V minimum) detection
Large volt mark with the buzzer sound
Automatic data hold function
Bargraph just like analog meter
Large display with backlight
Easy to use & tough body
Display : numeral display 4000
Sampling rate : 2 times / sec.
SAFETY:
IEC61010 CAT.III 600V
OPTIONAL ACCESSORIES:
Clip adapter : CL-16
SPECIFICATIONS:
| Function | Measuring range | Best accuracy | Resolution |
|---|---|---|---|
| MΩ | 4M/40M/400M/4000MΩ | ±(3%+4) | 0.001MΩ |
| Rated voltage | 250/500/1000V | ||
| ACV/DCV | 600V(AC/DC Automatic detection) | ±(3%+2) | 1V |
| Ω（Continuity) | 4000Ω(Buzzer and ALARM indicator) | ±(3%+3) | 1Ω |
| Ω | 40Ω | ±(3%+10) | 0.01Ω |
| Rated current | 1.0～1.2mA |
| Short-circuit current | 2mA or less |
| Live circuit detection | At 30V AC/DC or more, inhibits test, buzzer sounds and ALARM indicator lights up |
| Battery | LR6(AA alkaline battery)1.5V×6 |
| Size/Mass | H170×W142×D57mm/Approx. 600g |
| Safety standard | IEC61010 CAT.Ⅲ 600V |
Related products
-
M53 INSULATION TESTER – SANWA
Add To QuoteDigital for Elevator maintenance
2 test voltage ranges, for Elevator maintenance
- 500V; 200MΩ
- 15V; 20MΩ
- Auto range
- Auto power off(1min.)
- Low battery power indication
- Remote speed measurement(Speed meter SE9100 is necessary.)
-
MG5000 Insulation Tester – SANWA
Add To QuoteDigital 5 ranges
High voltage type
- 5000V; 1000GMΩ
- 2500V; 100GMΩ
- 1000V; 2000MMΩ
- 500V; 1000MMΩ
- 250V; 100MMΩ
- Test voltage DC5000V/2500V/1000V/500V/250V
- Insulation Resistance up to 1TΩ
- Short circuit current up to 4mA
- Dielectric Absorption Ratio(DAR)
- Polarisation Index(PI)
- Auto discharge function
- Data hold(Auto)
- Auto power save
-
PDM 5219S INSULATION TESTER – SANWA
Add To QuoteAnalog 3 ranges
3 test voltage ranges, Lightweight design
- 500V; 100MΩ
- 250V; 100MΩ
- 125V; 100MΩ
- Easy viewing and readable graduations
- One-shot or continuous measurement push switch
- DCV measurement range(DCV60V)
- Auto discharge function
- Inner battery check range
- Shoulder strap
-
DG 10 INSULATION TESTER – SANWA
Add To QuoteInsulation Testers Pocket size/Digital Suitable for high voltage insulation measurement at construction sites BASIC FEATURES: Test voltage DC500V / 125V Wide measurement range 1kΩ〜400MΩ High resolution 0.001MΩ（1kΩ） Data hold Auto power save (30min.) Sampling rate : 2 times / sec. for numeral disply,　20 times / sec. for bar graph SPECIFICATIONS:
-
DG35a DIGITAL MULTIMETER CLAMP METER – SANWA
Add To QuoteDG35a MΩ Tester Hybrid pocket size MΩ tester + clamp meter 500V; 40MΩ 250V; 40MΩ 125V; 40MΩ Lightweight approx.160g DCV/ACV measurement functions DCV/AC current measurable up to 100A Test leads holder U-shaped clamp sensor, 7mm thick Specifications DG35a Measuring rage Best accuracy Resolution MΩTest 40MΩ ±(3.0%+3) 0.01MΩ Test voltage 125/250/500V DCA 100A ±(2.0%+5) 0.1A ACA …
