Category
PDM1529S INSULATION TESTER – SANWA
Analog 3 ranges
3 test voltage ranges, Lightweight design
- 1000V; 2000MΩ
- 500V; 100MΩ
- 250V; 100MΩ
- Easy viewing and readable graduations
- One-shot or continuous measurement push switch
- DCV measurement range(DCV60V)
- Auto discharge function
- Inner battery check range
- Shoulder strap
PDM1529S
Insulation Testers
BASIC FEATURES:
- Test voltage DC1000V / 500V /250V
- Easy viewing and readable scale graduations
- One-shot or continuous measurement push switch
- DCV measurement range (DC60V)
- Auto discharge function
- Inner battery check range
- Shoulder Strap
SAFETY:
IEC61010-1 CAT.III 600V.
SPECIFICATIONS:
Scale(MΩ) | 0.5~2~1000~2000MΩ 1000V 0.02~0.1~50~100MΩ 500V/250V |
|
Tolerance | ± 5% of reading(1st effective measurement range:written in thick print above) ±10% of reading(2nd effective measurement range:written in small type above) |
|
ACV | 600V | |
Tolerance | Within ±5% of the max. scale value(50~60Hz sine wave) | |
DCV | 60V | |
Tolerance | Within ±5% of the max. scale value | |
Rated current | 1.0~1.2mA | |
Battery | 6LF22/6LR61(9V alkaline battery)x1 | |
Size/Mass | H144×W99×D43mm/Appox. 310g | |
Safety standard | IEC61010 CAT.Ⅲ 600V |
Related products
-
DM1009S INSULATION TESTER – SANWA
Add To QuoteAnalog single range
1000V/2000MΩ single range, Lightweight design
- One-shot or continuous measurement push switch
- DCV measurement range (DC60V)
- Auto discharge function
- Inner battery check range
- Shoulder Strap
-
DG35a DIGITAL MULTIMETER CLAMP METER – SANWA
Add To QuoteDG35a MΩ Tester Hybrid pocket size MΩ tester + clamp meter 500V; 40MΩ 250V; 40MΩ 125V; 40MΩ Lightweight approx.160g DCV/ACV measurement functions DCV/AC current measurable up to 100A Test leads holder U-shaped clamp sensor, 7mm thick Specifications DG35a Measuring rage Best accuracy Resolution MΩTest 40MΩ ±(3.0%+3) 0.01MΩ Test voltage 125/250/500V DCA 100A ±(2.0%+5) 0.1A ACA …
-
MG 500 INSULATION TESTER – SANWA
Add To QuoteDustproof / splashproof(IP54) design
- 500V; 4000MΩ
- 250V; 4000MΩ
- 125V; 4000MΩ
- Hot-line state (30V minimum) detection
- Large volt mark with the buzzer sound
- Automatic data hold function
- Bar graph just like analog meter
- Large display with backlight
- Easy to use & tough body
- IP54
- Continuity test(200mA) function
-
MG5000 Insulation Tester – SANWA
Add To QuoteDigital 5 ranges
High voltage type
- 5000V; 1000GMΩ
- 2500V; 100GMΩ
- 1000V; 2000MMΩ
- 500V; 1000MMΩ
- 250V; 100MMΩ
- Test voltage DC5000V/2500V/1000V/500V/250V
- Insulation Resistance up to 1TΩ
- Short circuit current up to 4mA
- Dielectric Absorption Ratio(DAR)
- Polarisation Index(PI)
- Auto discharge function
- Data hold(Auto)
- Auto power save
-
PDM 5219S INSULATION TESTER – SANWA
Add To QuoteAnalog 3 ranges
3 test voltage ranges, Lightweight design
- 500V; 100MΩ
- 250V; 100MΩ
- 125V; 100MΩ
- Easy viewing and readable graduations
- One-shot or continuous measurement push switch
- DCV measurement range(DCV60V)
- Auto discharge function
- Inner battery check range
- Shoulder strap
Contact Us
For Quotes:
email: info@bhumika.ca
phone: 613-619-0894