Category
Most Popular Products
Product was successfully added to quote request.View List
SP21 ANALOG MULTITESTER – SANWA
$0.00
Shockproof meter
With continuity check beeper
- Employs shockproof taut-band meter that is not easily damaged even if dropped
- Zero center meter for ± DCV measurement
- Double protection with fuse and diode to protect the internal circuit from overvoltage
- Battery check
- With a tilt stand that helps to read the meter
SP21
Analog Multitesters Drop shock proof meter
Continuity check buzzer
BASIC FEATURES:
- Drop shock proof taut-band meter
- ±DCV zero center meter
- Fuse and diode protection
- Battery check
- Tilt stand
- Bandwidth : 40〜100kHz (AC12V)
SPECIFICATIONS:
Function | Measuring range | Tolerance |
---|---|---|
DCV | 0.3(5kΩ)/3/12/30/120/600V(20kΩ/V) | Within ±3% |
±DCV | ±6/30V(20kΩ/V) | ±5% of full scale |
ACV | 12/30/120/300/600V(9kΩ/V) | ±3% of full scale |
DCA | 60μ/30m/0.3A | ±3% of full scale |
Resistance | 2k/20k/2MΩ | ±3% of arc |
Capacitance | 500μF | Approximate value |
Continuity | ≦ approx.100Ω: Beep sounds. Open circuit voltage: approx. 3V | |
Battery check | 1.5V/1.5V button(1.0 to 2.0V) | Approximate value |
Frequency characteristic | AC12V range 40Hz to 100kHz: frequency response within ±3% |
Battery | R6P(AA battery)1.5Vx2 |
Built-in fuse | New model:F0301 Φ5x20mm 0.5A/250V 300A Glass fuse Old model :F0305 Φ6.3x30mm 0.5A/250V 300A Glass fuse |
Size/Mass | H144×W99×D41mm/Approx. 270g |
※The value in ( )at DCV and ACV is input resistance
OPTIONAL ACCESSORIES:
HV probe : HV-20
Carrying case : C-SPH or C-SP
Clip adapter : CL-11, CL-13a, CL-15a, CL-DG3a, TL-8IC
Test lead : TL-21M, TLF-120
Category: Analog Multitesters
Related products
-
CP – 7D ANALOG MULTITESTER – SANWA
$0.00Add To QuoteWide scale with mirror for easy reading of measured values
- Wide scale with mirror
- Fixed test leads for safety and operability
- Employs metal oxide film resistors that are high precision, heat resistant, smokeless
- Battery check
- Internal circuit protection with fuse and diode
-
AP 33 ANALOG MULTITESTER – SANWA
$0.00Add To QuotePocketable Analog Multimeter / Analog Multitester
- Employs test leads woven with nylon. Reduces the possibility of wire damage due to winding and pulling
- The test leads can be winded up and stored
- Battery check function has 2 ranges of 1.5V/9V
- Shock absorbing rubber that is robust against falling
-
CX 506a ANALOG MULTITESTER – SANWA
$0.00Add To QuoteCapacitance measurement function with built-in transistor oscillator
- Variety of measurement functions by using 26-contact switch
- Capacitance measurement from 50pF to 2000μF
- High input resistance 50kΩ/V (each range of DC3 to 300V)
- DC polarity switchable
-
TA 55 ANALOG MULTITESTER – SANWA
$0.00Add To QuoteAutomobile measurement support
30A range supporting automobile measurement
- Improved visibility with color matching of scale and range selector switch
- Continuity check function with beeper sound
- Stand to make easy to read the scale
- Measurable up to DCA30A(300A using an optional clamp)
- Battery check(12V battery only)
-
YX – 361TR ANALOG MULTITESTER – SANWA
$0.00Add To QuoteVariety of measurement functions by using 24-contact switch
- Employing 24-contact switch and plus alpha function enable you to enjoy a total of 33 functions
- Zero center meter for ± DCV measurement
- With LED for continuity check
- With OUTPUT measurement terminal (series capacitor inserted)
- Battery check
- DC current gain (hFE) of transistor can be measured by using separately available hFE connector
Contact Us
For Quotes:
email: info@bhumika.ca
phone: 613-619-0894