Category
Most Popular Products
Product was successfully added to quote request.View List
YX – 361TR ANALOG MULTITESTER – SANWA
$0.00
Variety of measurement functions by using 24-contact switch
- Employing 24-contact switch and plus alpha function enable you to enjoy a total of 33 functions
- Zero center meter for ± DCV measurement
- With LED for continuity check
- With OUTPUT measurement terminal (series capacitor inserted)
- Battery check
- DC current gain (hFE) of transistor can be measured by using separately available hFE connector
Analog Multitesters – Multifunctional model
Wide measurement range
BASIC FEATURES:
- Total 35 wide ranges (24ch sw + additional fuctions)
- ±DCV zero center meter
- LED for continuity check
- OUTPUT terminal (series capacitor terminal)
- Battery check
SPECIFICATIONS:
Function | Measuring range | Tolerance |
---|---|---|
DCV | 0.1/0.5/2.5/10/50/250/1000V(20KΩ/V) | ±2.5% of full scale |
±DCV | ±5/25V(40kΩ/V) | ±5% of full scale |
ACV | 2.5/10/50/250/1000V(9kΩ/V) | ±3% of full scale (2.5/10V:±4% of full scale) |
DCA | 50μ/2.5m/25m/0.25A | ±2.5% of full scale |
Resistance | 2k/20k/200k/2M/20MΩ | ±3% of arc |
Low-frequency output | -10~+62dB | ±3% of full scale (2.5/10V:±4% of full scale) |
hFE | hFE: 0~1000 | ±3% of arc |
Continuity | ≦ approx.10Ω: LED lights. Open circuit voltage: approx. 3V | |
Battery check | 1.5V |
Bandwidth | 40Hz~20kHz(Less than AC50V : ±3% of full scale) |
Battery | R6P(AA battery)1.5Vx2, 6F22(9V manganese battery)x1 |
Fuse | F0301 Φ5x20mm 0.5A/250V 300A Glass fuse |
Size/Mass | H150×W100×D37mm/Approx. 290g |
※The value in ( )at DCV and ACV is input resistance
OPTIONAL ACCESSORIES:
HV probe : HV-10
Carrying case : C-YS
Clip adapter : CL-11, CL-15a, CL-DG3a, TL-8IC
hFE probe : HFE-6T
Test lead : TL-91M
Category: Analog Multitesters
Related products
-
SP – 18D ANALOG MULTITESTER – SANWA
$0.00Add To QuoteCase and instrument in one body, that brings you a convenience to carry and store
- Resistance up to 200MΩ can be measured under the low voltage(3V)
- Capacitance measurement from 0.01μF to 1000μF
- Resistance measurement that has 3V of the terminal voltage allows to check an LED
- Battery check
- Front panel protection cover that also works as a stand
-
SP20 ANALOG MULTITESTER – SANWA
$0.00Add To QuoteShockproof meter
Provides DC high voltage and temperature measurement
- Has 20 measurement functions to cover general measurement applications
- 500μF capacitor check function
- With a tilt stand that helps to read the meter
- Provides DC high voltage and temperature measurement with separately available accessory
- Battery check
-
SP21 ANALOG MULTITESTER – SANWA
$0.00Add To QuoteShockproof meter
With continuity check beeper
- Employs shockproof taut-band meter that is not easily damaged even if dropped
- Zero center meter for ± DCV measurement
- Double protection with fuse and diode to protect the internal circuit from overvoltage
- Battery check
- With a tilt stand that helps to read the meter
-
AP 33 ANALOG MULTITESTER – SANWA
$0.00Add To QuotePocketable Analog Multimeter / Analog Multitester
- Employs test leads woven with nylon. Reduces the possibility of wire damage due to winding and pulling
- The test leads can be winded up and stored
- Battery check function has 2 ranges of 1.5V/9V
- Shock absorbing rubber that is robust against falling
-
VS – 100 ANALOG MULTITESTER – SANWA
$0.00Add To QuoteEmploys current-limiting fuse with 100kA of breaking current
- Tester for maintenance and management for electrical equipment that is suitable for measuring high-power low-voltage circuits(500V or lower)
- Built-in current-limiting fuse cuts off the current at 100kA to reduces the risk of arc discharge
- Hard case included
Contact Us
For Quotes:
email: info@bhumika.ca
phone: 613-619-0894