Category
Most Popular Products
PDM509S Insulation Tester – SANWA
$0.00
Analog single range
500V/100MΩ single range, Lightweight design
- 500V; 100MΩ
- One-shot or continuous measurement push switch
- DCV measurement range (DC60V)
- Auto discharge function
- Inner battery check range
- Shoulder Strap
Analog single range
500V/100MΩ single range, Lightweight design
- 500V; 100MΩ
- One-shot or continuous measurement push switch
- DCV measurement range (DC60V)
- Auto discharge function
- Inner battery check range
- Shoulder Strap
Specifications
Scale(MΩ) | 0.05~0.1~50~100MΩ | |
Tolerance | ± 5% of reading(1st effective measurement range : written in thick print above) ±10% of reading(2nd effective measurement range : written in small type above) |
|
ACV | 600V | |
Tolerance | Within ±5% of the max. scale value(50~60Hz sine wave) | |
DCV | 60V | |
Tolerance | Within ±5% of the max. scale value | |
Rated current | 1.0~1.2mA | |
Battery | 6LF22/6LR61(9V alkaline battery)x1 | |
Size/Mass | H144×W99×D43mm/Approx. 310g | |
Safety standard | IEC61010 CAT.Ⅲ 600V |
Related products
-
MG 500 INSULATION TESTER – SANWA
$0.00Add To QuoteDustproof / splashproof(IP54) design
- 500V; 4000MΩ
- 250V; 4000MΩ
- 125V; 4000MΩ
- Hot-line state (30V minimum) detection
- Large volt mark with the buzzer sound
- Automatic data hold function
- Bar graph just like analog meter
- Large display with backlight
- Easy to use & tough body
- IP54
- Continuity test(200mA) function
-
M53 INSULATION TESTER – SANWA
$0.00Add To QuoteDigital for Elevator maintenance
2 test voltage ranges, for Elevator maintenance
- 500V; 200MΩ
- 15V; 20MΩ
- Auto range
- Auto power off(1min.)
- Low battery power indication
- Remote speed measurement(Speed meter SE9100 is necessary.)
-
DG35a DIGITAL MULTIMETER CLAMP METER – SANWA
$0.00Add To QuoteDG35a MΩ Tester Hybrid pocket size MΩ tester + clamp meter 500V; 40MΩ 250V; 40MΩ 125V; 40MΩ Lightweight approx.160g DCV/ACV measurement functions DCV/AC current measurable up to 100A Test leads holder U-shaped clamp sensor, 7mm thick Specifications DG35a Measuring rage Best accuracy Resolution MΩTest 40MΩ ±(3.0%+3) 0.01MΩ Test voltage 125/250/500V DCA 100A ±(2.0%+5) 0.1A ACA …
-
DG 10 INSULATION TESTER – SANWA
$0.00Add To QuoteInsulation Testers Pocket size/Digital Suitable for high voltage insulation measurement at construction sites BASIC FEATURES: Test voltage DC500V / 125V Wide measurement range 1kΩ〜400MΩ High resolution 0.001MΩ(1kΩ) Data hold Auto power save (30min.) Sampling rate : 2 times / sec. for numeral disply, 20 times / sec. for bar graph SPECIFICATIONS:
-
DM1009S INSULATION TESTER – SANWA
$0.00Add To QuoteAnalog single range
1000V/2000MΩ single range, Lightweight design
- One-shot or continuous measurement push switch
- DCV measurement range (DC60V)
- Auto discharge function
- Inner battery check range
- Shoulder Strap
Contact Us
For Quotes:
email: info@bhumika.ca
phone: 613-619-0894